Kellys ALPINA ECO C05 dark-lime
frame size 483mm (19")/ 533mm (21")
fork hi-ten unicrown
head. composition threaded
center cartridge composition ( 124.5mm )
cranks PROWHEEL (48x38x28)
shifting SHIMANO SL-RS35-7 Revoshift
derailleur SHIMANO M191 (31.8mm)
shifter SHIMANO TX35
number of gears 21
pinion SHIMANO MF-TZ21-7 (14-28)
chain KMC Z51 (112 articles)
ALHONGA V-brake brakes
ALHONGA brake levers
brake cables DRIVING Force SCS (SlickCableSystem)
alloy hubs (32 holes)
rims KELLYS Draft 622x19 (32 holes / riveted)
string steel UCP
tires INNOVA 40-622 700x38C
stem steel (diam 25.4mm)
handlebars steel RiseBar (diam 25.4mm)
Kraton handles
seatpost steel (diam 27.2mm)
KLS CrossLine saddle
nylon pedals
Gears | 3x7 |
Groupset | Other |
Material | aluminium |
Brakes | V-brakes |
product ID | 15108 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews