GT Transeo 4.0 Womens 2016 trekking bike
All-day commuter bike, upright geometry, light aluminum frame, suspension fork.
The GT Transeo Womens has a compact women's geometry characterized by an upright sitting position. The front suspension fork provides a quiet and smooth ride on all types of surfaces. It doesn't matter if you want to get in shape, have some fun or just get from one point to another. The Transeo is thus an ideal bike for daily commuting to work, but also for long trips. Carriers and mudguards can be mounted on the bicycle.
Model year: 2016
Frame: NEW GT Transeo Triple Triangle 6061 series alloy, smooth welded, and hydroformed (TT,DT), forged drop-outs, chainstay disc mounts, all utility braze ons
Fork: SR Suntour NVX-DS HLO 75mm travel, pre-load adjust, Hydraulic Lockout, disc specific, fender mounts
Cranks: SR Suntour XCE 48/38/28
Central composition: Cartridge sealed
Shifters: Shimano Altus EF-51 Rapid Fire plus
Cassette: Sunrace CSM55 8spd cassette 11-32t
Chain: KMC Z72
Derailleur: Shimano FD M191
Derailleur: Shimano Altus RD-M310 8spd
Rims: Jalco JD200 Double Wall Alloy, 32h
Hubs: (F) All Terra Alloy 32h Disc Specific / (R) All Terra Alloy 32h Freehub Disc Specific
Pedals: High Impact nylon platform
Brakes: Tektro Mechanical Disc brake, 160mm rotor
Stem: all new 3D forged GT alloy stem
Handlebars: GT Type R flat riser bar, 31.8x640mm
Headstock: Kore 1B-1 1 1/8" Threadless, Zerostack
Brake levers: Shimano EF-51
Wires: Stainless steel 14g
Tires: (F/R) 700x35c Innova LandTracker w/ puncture protection
Saddle: GT All Terra bio-morphic
Seat post: GT All Terra two bolt alloy
Sizes: S, M, L
Color: dark blue/hot pink
Model year | 2016 |
Material | aluminium |
product ID | 13311 |
Size | XS | S | M | L | XL |
---|---|---|---|---|---|
Rider height (cm) | 142.24 - 152.40 | 152.40 - 165.10 | 165.10 - 177.80 | 177.80 - 185.42 | 185.42 - 198.12 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews