FORCE 58 Aluflex trekking mudguard set + stays, 28", black
FORCE Aluflex 58 trekking set of fenders + struts
A set of front and rear fenders, 58 mm wide, with metal struts.Note: in certain cases, it is necessary to shorten the struts for the correct positioning of the fenders.
|
Suitable for 28" trekking bikes
|
|
Double metal struts for better grip
|
|
Front fender mounting: strut and fork bolt
|
|
Rear fender mounting: strut and frame bolt
|
| Colour | black |
| Location | Set |
| Weight | 550 g |
| Material | flexible plastic + metal |
| product ID | 97180 |
•
ahoj, mam topstone carbon 2023 M ... snazil som sa odmerat co je treba, no neviem sa rozhodnut, ci mi tieto "58" budu pasovat do prednej vidle a zadnej stavby bez toho, aby som ich tam nasilu pasoval ...
vieme plis zistit ofiko sirku tychto blatnikov, resp. 48-ciek? ... snad by na plaste 45mm mohli postacovat ... dikes vsetkym za odpovede
•
Ahoj,
sirka je +/- milimeter, prave tych 58 mm
Kazdopadne 48cky na 45 mm plaste poskytnu fajn ochranu, samozrejme nezachyti to 100% necistot, ale drvivu vacsinu ano. Spravidla sa odporuca v idelanom pripade mat blatniky sirsie ako plaste aspon o 8-9 mm.
•
Super, mam tue 58, prubnem ci nebudu niekde skret o ram, vrrdu to vyzera byt ok, vzadu budem asi dorabat, alebo vymenim za 48 ak to bude zle vyzerat...🤘kazdopadne vdaka
•
I will buy 2 pcs of brackets for the rear fender for the part under the seat post. Also a clapboard that snaps onto the fender. They don't sell it separately anywhere. Can you get it?
Zhanam 2 ks uchytky na zadny blatnik na tu cast pod sedlovku. Taky pliesok, ktory sa nacvakne na blatnik. Nikde to samostatne nepredavaju. Viete to zohnat ?
Show translationAutomatically translated
•
Dobrý deň,
Myslíte toto https://www.kckcyklosport.cz/jezdec-drzak-k-blatniku-trekking-48mm-img-8994301_hlavni-fd-3.jpg ?
•
Mrzí nás to ale pre tieto blatníky (verziu 58mm) výrobca tento diel nemá.
All the answers to questions about delivery, payment, security, returns, warranty and much else.
We are the largest cycling e-shop in Slovakia, verified by 100,000+ customers.
We are available via e-mail, online chat, phone or in person at our MTBIKER stores.
Thanks to your order we can support cycling development.
The payment process is safe and we offer you a wide range of options.
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
arrow_outward
They also hide a wider coat. They hold well, they don't rattle or bang.
Good price/performance ratio.
I use it in combination with:
https://www.mtbiker.sk/shop/prislusenstvo/blatniky/prislusenstvo/sks-montazne-objimky-na-blatniki-.html (needs to be customized)
https://www.mtbiker.sk/shop/prislusenstvo/blatniky/prislusenstvo/koncovka-blatnika-force-58-plastova.html
Schovajú aj širší plášť. Dobre držia, nič nedrnci,nebucha.
Show translationAutomatically translatedDobrý pomer cena/výkon.
Používam v kombinácií s:
https://www.mtbiker.sk/shop/prislusenstvo/blatniky/prislusenstvo/sks-montazne-objimky-na-blatniky-.html (treba prispôsobiť)
https://www.mtbiker.sk/shop/prislusenstvo/blatniky/prislusenstvo/koncovka-blatnika-force-58-plastova.html
glossy coated aluminum profile.
parts for the bike are not included in the package. only self-tapping plastic.
rods are long, need to be sawn... sanded and sprayed with black
drill the plastic holders through, then push the rods through and it's easier to measure the correct size.
I was sent different lengths of upper and lower bars....
the rear metal clip must be pressed with pliers, otherwise it vibrates over time
on 700c35 and large with reserve
additionally ground on the side due to the sliding. he was leaning on the fender.
leskly oplastovany alu profil.
Show translationAutomatically translatedsroby na bajk nie su v baleni. iba plast samorezky.
tyce dlhe, treba pilit... osmirgloval a strekol ciernou
prevrtat plastove drzaky skrz, potom tyce prestrcit a tak lahsie namerat spravny rozmer.
mne vysli rozne dlzky hornych a dolnych tyci....
plechova spona zadneho treba stlacit kliestami, inak casom vibruje
na 700c35 aj velkou s rezervou
dodatocne zabrusene zboku kvoli presmykacu. opieral sa o blatnik.
The size 26" is indicated on the packaging - see photo (perhaps a faulty sticker, it may also fit a 26" size)
The mudguard was bought and mounted on a cross/trekking bike, as it is also stated in the eshop - it fits perfectly
good. The struts stick out a little (too much on the front fender), but the rubber protective ends are part of the package, and also: if they don't mind, they can be cut off from the struts.
! Screws for fixing to the frame and fork are not part of the package.
Na obale je uvedená veľkosť 26” - viď foto (možno chybná nálepka, možno sedí aj na 26”-ku)
Show translationAutomatically translatedBlatník bol kúpený a namontovaný na cross/trekking bicykel, ako je to aj uvedené v eshope - sedí celkom
dobre. Vzpery trocha vytŕčajú (na prednom blatníku až príliš), ale gumenné ochranné koncovky sú súčasťou balenia, a tiež: komu by vadili, dajú sa odrezať z vzpier.
! Skrutky k upevneniu na rám a vidlicu nie sú súčasťou balenia.
Good, but it's difficult to mount them on a mtb. The front fork will only go with extra clamps for the fork legs and homemade mounts. As you can see, you can't avoid DIY when mounting mudguards on a mtb. But they work great.
Dobré, no uchytiť ich na mtbcko je náročné. Predný na vidlu pojde iba s extra objimkami na nohy vidlice a podomácky spravenyni uchytmi. Ako, kutilstvu sa clovek pri blatnikoch obsadených na mtb nevyhne. Slúžia ale výborne.
Show translationAutomatically translated
Široké a odolné blatníky a za dobrú cenu. Skrutky na montáž dozadu v balení nie sú takže s tým treba počítať. Nastavenie jednoduché, primerať a skrátiť kovové bočné konzoly a doladiť na bajku.
Translate by GoogleShow the originalThey are quite wide, for a trekking bike without a suspension fork, the edges had to be cut out. They rattle on bumps because the inner lugs rub against the tread.
Sú dosť široké, na trekingový bike bez odpruženej vidly, bolo treba vyrezať okraje. Pri nerovnostiach rachotia, pretože vnútorné úchyty sa šúchajú o dezén.
Show translationAutomatically translatedFenders at a good price, satisfaction
After minor adjustments, it fits great
You just need to prepare the screws for attaching to the frame (7 pieces)
Blatníky za dobru cenu spokojnost
Show translationAutomatically translatedPo drobnych upravach sedie super
Len si treba pripravit skrutky na uchytenie do ramu (7 kusov)
A bit of work to adjust and cut the stiffeners, but it works. I'll see how long the plastic stiffener ends last.
Troska prace nastavit a zrezat vystuhy, ale ide to. Uvidim ako dlho vydrzia tie plastove koncovky vystuh.
Show translationAutomatically translatedNice fenders for a wheel diameter of approx. 42mm, but I still had to add fenders.
Fajn blatníky na priemer kolesa cca. 42mm, ale ešte som musel doplniť aj zásterky.
Show translationAutomatically translatedVery good fenders for my bike with 42mm tire width.
Veľmi dobré blatníky na môj bicykel so šírkou plášťov 42mm.
Show translationAutomatically translatedstill satisfied, even though the bars had to adapt
zatial spokojnost, aj ked tycky sa museli prisposobit
Show translationAutomatically translatedmoved on, my grovel is inappropriate - my fault
posunute dalej, nevhodne ma moj grvl - moja chyba
Show translationAutomatically translated