Petzl GRILLON safety system 5 m

GRILLON is certified in three PPE categories:

1. ANCHORAGE

The GRILLON adjustable anchor can be used to quickly set up a fixed anchor point. The length of the rope needed to adjust it is easily adjustable using the integrated self-locking device. The removable protective cover allows the rope to slide smoother and at the same time protects the rope from abrasive surfaces. It is available in four lengths.

Easy to use:

• Allows you to quickly set an anchor point that is longer than two meters
  
• The precise adjustment system allows easy adjustment of the length and tension at the anchor point
  
• Stitched end at both ends with a plastic cover that keeps the carabiner in the correct position and protects the rope from abrasion
  
• The removable protective cover protects the rope from abrasive surfaces and allows the rope to slide smoothly
  
• Available in four lengths: 2, 3, 4 and 5 m
  
• The length of the rope is immediately identified by a color-coded label at the end for the carabiner
  
• Spare ropes are available

2. Longitudinal locking line

GRILLON allows quick installation of a horizontal locking guide when a large work surface needs to be secured. The integrated self-locking device allows easy length adjustment depending on the distance between the two anchor points. It is available in four lengths for different situations.

• It is produced in four lengths: 5, 10, 15 and 20 cm
  
• Spare ropes are available

3. ADJUSTABLE CONNECTOR

The GRILLON adjustable coupling means is used as a positioning system for work on site, which complements the fall arrest system. Its length can be very easily and precisely adjusted as needed for comfortable placement in the work station. Depending on the configuration, it can be used in single or double mode. GRILLON is available in seven lengths (2, 3, 4, 5, 10, 15 and 20 m) and also in black. It is certified according to North American, European and Russian standards.

It can be used in two ways:

• Double mode, connection to the side attachment points of the harness when the user works with the weight on his feet. This type of connection ensures better load distribution on the belt. The length is set by pressing the rotary cam.
  
• Simple mode, connection at the front attachment point of the harness, when the anchor point is located above the user, the load is comfortably distributed in the waist and legs. The length is adjusted by operating the handle, while the free end of the rope is held in the hand.
  
• Stitched end at both ends with a plastic cover that keeps the carabiners in place and protects the rope from abrasion
  
• The protective cover protects the rope from abrasive contact and increases its slipperiness. The cover can be removed for use in simple mode to bring the user closer to the anchor point
  
• It is produced in seven lengths: 2, 3, 4, 5, 10, 15 and 20 m
  
• The lengths can be immediately identified by the color-coded labels at the end for the carabiner
  
• Available in two colors: white yellow and black
  
• Spare ropes are available