Fenix HP35R rechargeable headlamp, 4000 lm, black

Fenix HP35R Rechargeable Headlamp

Extremely powerful rechargeable headlamp Fenix HP35R offers unparalleled performance of up to 4000 lumens (ANSI) and a beam distance of 450 meters. Excellent performance was achieved using a powerful LED Cree XHP70 with a neutral tint and a pair of LEDs Luminus SST-20 with a warm tint and a high Color Rendering Index CRI 94.5. Warm light penetrates fog, rain, and snow better, making it especially useful in adverse weather conditions.



The headlamp is equipped with a long-range reflector and two smaller floodlight reflectors. The reflectors can be turned on separately or simultaneously in combined mode. With intuitive control via a rotary and electronic switch, you can handle any situation with clarity.



Comfortable wear on the head is ensured by a wide perforated strap in black. If you want to wear the headlamp only on a helmet, we recommend purchasing the Fenix HP35R SAR version, which has an integrated helmet mount with NVG interface and a flame-retardant and anti-static rubber strap for work helmets.



It is powered by a Li-ion battery with a capacity of 10000 mAh, located in a separate case connected by an adjustable cable. The case can be worn on the back of the head, attached to a belt, placed in a pocket, or backpack. This increases wearing comfort and better protects the batteries from cold in winter. The battery case is equipped with a red light with a power of up to 20 lumens, a charge indicator, and a USB-C charging port. The USB-C charging port also functions as an output, allowing the battery to be used as a power bank for charging your mobile phone, GPS navigation, and other USB devices.



The headlamp offers a total of 12 output modes. In the lowest mode with 5 lumens, it provides an excellent runtime of up to 500 hours (more than 20 days). The body of the headlamp is made of aircraft-grade aluminum alloy, ensuring excellent cooling and resistance to damage. This high-performance headlamp with a separate battery is designed specifically for search and rescue operations, caving, and work use, but it will also be appreciated by ski tourers, mushers, and enthusiasts of other extreme sports and outdoor activities.

All headlamp parameters (lumen output, battery runtime, waterproofness, beam distance, and impact resistance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Using the Fenix HP35R Headlamp

The headlamp is turned on and off by the rotary switch on the right side. In the first position, the headlamp is off. Turning to the second position turns on the long-range reflector mode. Turning to the third position turns on the floodlight mode. Turning to the fourth position turns on a combination of both reflectors. Output modes in individual positions are cycled by pressing the button on the side of the rotary switch.



Red light on the battery case is activated by pressing and holding the button on the battery case for approximately 0.5 seconds. Subsequent presses cycle between flashing mode (5 lumens) and steady light (20 lumens).



Memory for the last set output mode - the headlamp has memory and will always turn on in the last set output mode of the selected reflector, except for the highest modes of the long-range and floodlight reflectors, which will turn on in the second-highest mode of the respective reflector.



The length of the cable connecting the headlamp to the battery case can be extended using the extension cable, which is included in the package.

Battery status indication - pressing the button on the battery case activates the battery capacity indicator (four illuminated LEDs indicate 80-100%, three LEDs 60-80%, two LEDs 40-60%, one LED 20-40%, one blinking LED indicates 20% of remaining battery capacity).



Charging - open the rubber cover of the USB-C port on the battery case and connect it to a computer, AC USB adapter, or car USB adapter using the included USB-C cable. You can also use any mobile phone charger with a USB-C connector. During charging, the indicator LEDs on the battery case blink; after full charge, they light up continuously. Charging a fully depleted battery takes approximately 2 hours when using a USB source with a power of at least 27W. Using a weaker source will extend the charging time.



Activating USB output (power bank function) - connect the device you want to charge. Activation of the USB output is indicated by the blinking LEDs on the case.



Intelligent overheat protection - if the headlamp temperature rises above 55 °C, it will automatically start reducing output until its temperature stabilizes. Once the temperature drops below 55 °C, the output will automatically increase again.



Intelligent proximity sensor dimming - The headlamp has a built-in protection circuit. When the reflector gets closer than 60 mm to the illuminated object for more than 1 second, it automatically reduces the output to a low mode to prevent damage to the object from strong light and glare from reflected light. When the reflector is further away from the illuminated object, the headlamp automatically restores the previously used output level. Turning the intelligent proximity sensor on/off - with the headlamp off, press and hold the side button for 6 seconds. The function is indicated by two blinks in low mode when turned on. The function is indicated by eight blinks in low mode when turned off.

Notice

• Do not disassemble sealed parts yourself, as this will void the warranty
• If the headlamp blinks, does not switch to higher output modes, or does not turn on, it may be due to one of the following reasons:
  
  • The battery is depleted - charge it
  • Ensure the connector on the cable between the headlamp and the battery case is securely connected