Fenix TK11R rechargeable flashlight, 1600 lm

Fenix TK11R is a rechargeable tactical flashlight with simple operation and quick strobe activation capability, delivering up to 1600 lumens. It is equipped with a top-tier Luminus SFT-40 LED, allowing it to illuminate up to 420 meters. The flashlight features a dual tactical tail switch for faster and more reliable control in critical situations. The flashlight head has a strike bezel, making it usable for breaking glass or self-defense. Its robust design allows for mounting on long guns, making it suitable for professionals, law enforcement, and hunting. The flashlight is powered by a single high-capacity 18650 3400 mAh Li-ion battery (included in the package), which charges directly in the flashlight via a modern USB-C port and provides power for up to 25.5 hours of runtime, or can be powered by two disposable CR123A batteries in emergencies. Its solid and waterproof design makes this tactical flashlight primarily suitable for harsh outdoor conditions and for use by security forces, in search and rescue operations, and for hunting.

All flashlight parameters (lumen output, battery runtime, waterproofness, beam distance, and impact resistance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Fenix TK11R Flashlight Parameters

• Features a powerful Luminus SFT-40 LED with a lifespan of 50,000 hours.
• Six output modes: 1600 lumens (1.8 hours) -> 350 lumens (4.2 hours) -> 30 lumens (25.5 hours) -> 1600 lm strobe with variable frequency.
• Runtime figures are measured with a rechargeable 18650 Li-ion battery with a capacity of 3400 mAh (included in the package).
• Two 3V CR123A lithium batteries can be used as an alternative power source.
• USB-C charging port is hidden under a rubber cover on the flashlight body.
• Battery level indication.
• Highly efficient smooth reflector for a beam with a range of up to 420 meters (45000 cd).
• Intelligent overheat protection, low voltage warning.
• Dimensions: 14.55 cm (length) x 3.4 cm (head diameter) x 2.35 cm (body diameter).
• Weight: 117.5 grams (without battery), 166.5 grams (with battery).
• Durable body construction made of aerospace-grade hard-anodized aluminum.
• Hard scratch-resistant surface finish - Type III hard anodized.
• Impact resistant from a drop of 1 meter.
• Waterproof and dustproof according to IP68 standard (tested underwater at a depth of 2 meters for 30 minutes).
• Toughened ultra-clear glass lens with anti-reflective coating.
• Dual tactical tail switch (momentary on/off function by holding, instant strobe).
• Trapezoidal threads highly resistant to wear.
• The flashlight comes with a battery, wrist lanyard, USB-C charging cable, spare O-ring, and a belt holster.
• Optional accessories available for purchase: AER-02 remote pressure switch, AOT-M traffic wand, AOF-M red filter, and AOD-M diffuser.
• The following accessories are also compatible with the flashlight: ALG-15 quick-detach rail mount, ALG-00 quick-detach rail mount, Fenix ALG-16 M-LOK mount, Fenix ALG-18 helmet mount, helmet mount, metal magnetic helmet mount, plastic magnetic helmet mount, scope mount, metal scope mount, Fenix ALD-05 helmet strap, FB-1 bike mount, Fenix bike mount.
• A USB AC adapter and a USB car adapter can also be purchased separately for the flashlight.

Using the TK11R Flashlight

The flashlight may have an insulating cover on the battery from the factory. Remove it from the battery before first use.

To turn the flashlight on/off, press the larger tactical button located at the tail of the flashlight; hold it for momentary activation. By pressing the side switch button, you can cycle through the output modes at any time during operation. To switch to strobe mode while the flashlight is on, hold the side switch button for approximately 0.5 seconds. To turn the flashlight on directly into strobe mode, press and hold the side switch button.

Intelligent Overheat Protection - Due to the high output, the flashlight can generate heat. If the temperature exceeds 65°C, the output will automatically decrease. Once the temperature drops below 65°C, the highest output can be used again.

Battery Level Indication - The flashlight always indicates the battery charge level for three seconds after turning it on. Green indicates sufficient charge (100% - 85%), flashing green indicates 85% - 50%, solid red indicates 50% - 25%, and flashing red indicates a critically low battery (25% - 1%). If the battery is low, the flashlight will gradually and automatically switch to lower output modes.

Charging - Open the rubber cover of the charging port on the side of the flashlight and connect the included cable (USB-C connector); plug the other end of the cable into a computer, or a USB adapter for mains or car power. The side indicator will glow red during charging. It will turn green when fully charged. Charging a fully depleted battery takes approximately 3.5 hours. The flashlight cannot be used while charging.

Notice

• Use only high-quality rechargeable 18650 batteries with protection circuits.
• Insert batteries with the positive pole facing the head of the flashlight.
• If the protective rubber O-rings appear damaged after prolonged use, replace them. The O-rings should also be lubricated to prevent rubber erosion. Adhering to these rules will ensure proper waterproof protection of the flashlight.
• If the flashlight is blinking, not switching to higher output modes, or not turning on, it may be due to one of the following reasons:
  
  • The battery is depleted - charge or replace it.
  • The contacts inside the flashlight are dirty - clean them with a cotton swab dipped in alcohol.
  • The head, body, or tail cap of the flashlight is loose, tighten them.

Output: 1600lm
Max. Runtime: 25.5h
Beam Distance: 420m
Number of Modes: 4
Weight: 167g
Power Source: 1x 18650
Power Source: 2x CR123A
Light Source: Luminus SFT-40
Waterproof: IP68 (2m submersible)