Fenix E05R rechargeable flashlight, black

Rechargeable flashlight Fenix E05R, despite its miniature dimensions of less than 7 cm and weight of only 24 grams, offers a surprising output of up to 400 lumens (ANSI), with which it can illuminate up to a distance of 64 meters in BURST mode. It achieves these parameters thanks to the powerful LED XP-G2 S3 with a lifespan of 50,000 hours of light. It is powered by a built-in 320 mAh Li-pol battery, which is charged via a micro-USB connector directly in the flashlight. With this capacity, it can shine for up to 30 hours in the lowest mode. High quality of workmanship, durability, and waterproofness according to IP68 standard are a matter of course. Four lighting modes, which are easily cyclically switched by a button on the side of the flashlight, make this light a great companion for everyday carry. Attached to keys, in a pocket, handbag, or backpack, it certainly won't take up much space.

All flashlight parameters (luminous flux, battery operating time, waterproofness, beam distance, and impact resistance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Fenix E05R flashlight parameters

• It uses a powerful LED XP-G2 S3 with a lifespan of 50,000 hours.
• Four power modes: BURST 400 lumens (while the button is held) -> 150 lumens (0.93 hours) -> 25 lumens (5 hours) -> 3 lumens (30 hours).
• Powered by a built-in 320 mAh Li-pol battery.
• Charging via micro-USB connector.
• Charging time for a completely discharged battery is approx. 1 hour.
• Overheating protection.
• Dimensions 6.8 cm (length) x 1.53 cm (head) x 1.5 cm (body).
• Weight 24 grams.
• Light beam with a range of 64 meters (1046 cd).
• Made of aircraft-grade hardened aluminum. Durable surface - Type III hard anodized.
• Impact resistant from a fall of 1 meter.
• Waterproof and dustproof according to IP68 standard (tested underwater at a depth of 2 meters for 30 minutes).
• The package includes a metal keychain ring, a spare O-ring seal, and a micro-USB cable.

Usage

Turning the flashlight on or off is done by holding the button for 0.5 seconds. Further short presses cyclically switch between lighting modes of 3 - 25 - 150 lumens. To activate the BURST mode of 400 lumens, hold the button for more than 1.2 seconds. After releasing the button, the flashlight will switch to the lowest lighting mode.

The control button can be locked to prevent accidental activation, e.g., during transport in luggage. Press the control button twice quickly (within 0.5 seconds). The flashlight will flash twice in the lowest light mode, indicating it is locked. To unlock, press the button twice quickly again; the flashlight will flash twice again and is unlocked.

Overheating protection - due to the miniature dimensions of the flashlight and high output in the highest modes, the flashlight will automatically reduce brightness once it exceeds 60 °C. After the temperature decreases, the highest modes can be reactivated.

Charging

Unscrew the waterproof nut covering the micro-USB connector. Then connect the charging cable to the USB port of a computer, a USB power adapter, or a car charger. During charging, the indicator LED on the flashlight glows red; after full charge, it glows green. The standard charging time for a completely discharged flashlight is 1 hour.

Note

• Do not disassemble sealed parts yourself, as this will void the warranty.
• If the flashlight is blinking or not turning on, it may be due to one of the following reasons:
  
  • The battery is discharged, please charge it.

Warranty

Two-year warranty.

Beam distance: 64m
Max. runtime: 30h
Output: 400lm
Number of modes: 4
Weight: 24g
Power supply: USB charging
Power supply: Internal battery
Light source: Cree XP-G2
Waterproofness: IP68 (2m immersion)