Fenix E01 V2.0 flashlight, 100 lm, blue

The second generation of the popular mini flashlight Fenix E01 V2.0 offers three power modes with a luminous flux of up to 100 lumens (ANSI). Thanks to its negligible dimensions, it is an ideal representative of the EDC (Every Day Carry) category, it can be carried all the time, whether in a pocket, on keys, or in a wallet. The flashlight is not much larger than the AAA micro battery it is powered by.



High quality of workmanship, durability, and water resistance are a matter of course. The ultra-thin collimator creates a wide light beam with a range of up to 35 meters. With its properties, this flashlight is destined to serve as a small, reliable companion that is always at hand. You will always be pleased with this useful gift.

 

All flashlight parameters (luminous flux, battery runtime, water resistance, beam distance, and impact resistance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Fenix E01 V2.0 flashlight parameters

• It uses a powerful Luminus SST-20 LED with a lifespan of 50,000 hours.
• Three power levels:
  
  • measured with rechargeable NiMH batteries: 100 lumens (50 minutes) -> 25 lumens (4.5 hours) -> 5 lumens (23 hours).
  • measured with a disposable alkaline battery: 100 lumens (50 minutes) -> 25 lumens (4.8 hours) -> 5 lumens (25 hours).
• It uses only one micro battery (type AAA - alkaline, lithium, or rechargeable NiMH). These batteries are cheap and widely available.
• The longest runtime is provided by Energizer L92 lithium micro batteries (especially suitable for extreme temperature conditions).
• Runtime is measured with a 750mAh rechargeable NiMH battery and the included disposable alkaline battery.
• Supported battery voltage 0.9-1.7V.
• Dimensions 6.65 cm (length) x 1.5 cm (head diameter) x 1.4 cm (body diameter).
• Weight 13 grams (without battery).
• Wide beam with a range of 35 meters (304 cd).
• Made of aircraft-grade hardened aluminum. Durable surface - Type III hard anodized.
• Impact resistant from a fall of 1 meter.
• Water and dustproof according to IP68 standard (tested underwater at a depth of 2 meters).
• Reliable rotary switch.
• The package includes a metal ring for hanging on keys, a spare O-ring, and a micro alkaline battery.

Usage

To turn on the flashlight, point the reflector away from you and twist the reflector counterclockwise (tighten the head). Turning in the opposite direction will turn off the flashlight (loosen the head). To change the brightness, quickly turn the flashlight off and on again from the on state. This will switch the flashlight to the next output level. If you leave the light off for more than 1.5 seconds, it will return to the lowest brightness mode (5 lumens).

Overheating protection - during prolonged operation at the highest brightness mode, the flashlight may reduce its output to achieve optimal temperature.

Notice

• Do not disassemble the sealed part of the flashlight head yourself, as this will void the warranty.
• Use only high-quality micro batteries to avoid damaging the flashlight, for example, due to leakage of substances from the battery.
• Remove the batteries from the flashlight if you will not be using it for a long time or if the battery is already discharged.
• Insert the battery with the positive pole facing the flashlight head.
• If the protective rubber rings appear damaged after a long period of use, replace them. The rings also need to be lubricated to prevent rubber erosion. By following these rules, the flashlight will be properly protected against water.
• If the flashlight flashes or does not turn on, it may be due to one of the following reasons:
  
  • The batteries are almost discharged - replace them.
  • The contacts inside the light are dirty - clean them with a cotton swab dipped in alcohol.

Beam distance: 35 m
Max runtime: 25 h
Output: 100 lm
Number of modes: 3
Weight: 13 g
Power supply: 1x AAA
Light source: LED Luminus SST-20
Water resistance: IP68 (2 m submersible)