Fenix WF26R rechargeable flashlight, black

The reliable service flashlight Fenix WF26R offers a light output of up to 3000 lumens and a beam distance of 450 meters. It is powered by an included 21700 Li-ion battery with a capacity of 5000 mAh, which charges directly in the flashlight using the included cradle with a USB cable. The flashlight easily snaps into the cradle for charging. The cradle is equipped with mounting holes, allowing it to be screwed to a wall, for example. The charging cable can be removed from the cradle to charge the flashlight outside of it.

Fenix WF26R features a total of six lighting modes (including strobe and SOS) with a runtime of up to 44 hours. It uses a dual tactical switch for control, allowing for faster and more reliable operation in crisis situations. For example, it can be easily turned on directly into strobe mode.

Excellent technical parameters, waterproof and impact-resistant design make this flashlight suitable for use in harsh outdoor conditions. It will be especially appreciated by members of armed forces, firefighters, rescuers, and mountain services. It will also find favor with security agencies and object guards.

All flashlight parameters (light output, battery runtime, waterproofness, beam distance, and impact resistance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard. 

Fenix WF26R Flashlight Parameters

• Uses premium LED Luminus SFT-70 with a lifespan of 50,000 hours.
• Six performance modes: 3000 lumens (total 2.7 hours, reduced to 1000 lm after 1 minute) -> 1000 lumens (2.8 hours) -> 350 lumens (8.9 hours) -> 30 lumens (44 hours) - Strobe (3000 lumens) - SOS (100 lumens).
• Light output and runtime are measured with the included 21700 Li-ion battery with a capacity of 5000 mAh.
• Electronics with digital constant power regulation and intelligent overheating protection.
• Made from aircraft-grade hardened aluminum 6061-T6, the flashlight is impact-resistant from a height of 1.5 meters.
• Protection against accidental reverse battery insertion (polarity reversal).
• Durable surface - Type III hard anodized.
• Battery charge status indicator at the flashlight head.
• Removable steel clip for attachment to a pocket or belt.
• Charging cradle with magnetic charging, the cradle is powered by a standard USB cable (USB source not included).
• The cable can be removed, and the flashlight charged outside the cradle.
• The flashlight has memory and always turns on in the last set mode (does not apply to flash modes).
• Waterproof and dustproof according to IP68 standard (tested underwater at a depth of 2 meters for 4 hours)
• The reflector creates a well-focused light beam with a range of 450 meters (52,888 cd).
• Flashlight dimensions: 15.6 cm (length) x 4.04 cm (reflector diameter) x 2.66 cm (body diameter).
• Cradle dimensions: 7.67 x 4.37 x 4.7 cm.
• Weight 222 grams with battery.
• The flashlight comes with a Fenix ARB-L21-5000 V2.0 battery, charging cradle with USB cable, wrist strap, and spare o-ring.
• Model WF26R is supplied without a case. A basic textile case can be purchased separately.
• Optional original accessories include the Fenix ALD-05 strap for helmet use, Fenix bike mount, USB power adapter, and car USB adapter.

Using the Fenix WF26R Flashlight

From the factory, there may be an insulating cover on the battery inside the flashlight. Remove it from the battery before first use.

To turn on/off press the larger tactical button located at the end of the flashlight, for momentary activation hold the button. If the flashlight is on, pressing the side switch button allows you to switch between performance modes at any time during operation. To switch to strobe mode with the flashlight on, hold the switch button for about 0.5 seconds, then by pressing the button again, you can switch between strobe and SOS modes. To turn on the flashlight from off directly into strobe mode, press and hold the switch button.


Charging - snap the flashlight with the charging connector facing into the cradle. Alternatively, if you have removed the charging cable from the cradle, attach the magnetic connector of the charging cable to the connector on the flashlight. Connect the other end of the cable to a computer or USB power adapter or car adapter (adapters are not included). During charging, the side indicator lights up red. Once fully charged, it lights up green. Charging a fully depleted battery takes approximately 3 hours using a 3A source. The flashlight cannot be used during charging.


Intelligent Overheating Protection - due to the flashlight's high output of 3000 lumens, the temperature increases. If the temperature exceeds 60°C, the output is automatically reduced. Once the temperature drops below 60°C, the highest output can be used again.


Battery Charge Status Indicator - the flashlight always indicates the battery charge status three seconds after turning on. Green indicates sufficient charge (100% - 85%), green flashing 85% - 50%, steady red 50% - 25%, and flashing red critically low battery (25% - 1%). If the battery is depleted, the flashlight will gradually automatically switch to lower performance modes.
Low Battery Warning - the flashlight will gradually automatically switch to the lowest mode, and then the indicator will flash red continuously.

Warning

• Do not disassemble the sealed part in the flashlight head yourself, as this will void the warranty.
• Use only quality 21700 Li-ion batteries to avoid damage to the flashlight, for example, due to battery leakage.
• If the protective rubber rings appear damaged after prolonged use, replace them.
• If the flashlight blinks, does not switch to higher output, or does not light up, it may be due to one of the following reasons:
  
  
  • The battery is depleted, charge it.
  • The contacts inside the flashlight are dirty – clean them with a cotton swab dipped in alcohol.
  • The flashlight tail cap is loose, tighten it.

Output:3000lm

Max. Runtime:44hrs

Beam Distance:450m

Number of Modes:6

Weight:222g

Power Supply:1x 21700

Light Source: Luminus SFT-70

Waterproof:IP68 (submersion 2 m)