Fenix TK30R rechargeable laser flashlight, 500 lm, black

The Fenix TK30R rechargeable laser flashlight is one of the tactical flashlights with the longest beam distance in our offer. Its white laser light creates an extremely focused beam, capable of illuminating up to a distance of 1500 meters with a luminous flux of up to 500 lumens (ANSI). The light source is a white laser (Class 1) with LEP (laser excited phosphor) technology, known for its use primarily in the automotive industry in luxury vehicles. Power is supplied by a single 21700 Li-ion battery with a capacity of 6000 mAh (included in the package), which is charged via a USB-C connector directly in the flashlight. The charging port is covered by a screw-on cap, making it perfectly protected against water and dirt. The flashlight is thus fully waterproof and dustproof according to the IP68 standard (tested underwater at a depth of 2 meters). The TK30R features two levels of white light output with a runtime of almost 9 hours, plus a strobe mode. The flashlight uses a tactical switch with a rotary selector for choosing between high and low output and for locking. The flashlight can also be activated directly into strobe mode. The luminous flux is concentrated into a narrow beam, directing all light to a specific target, making the flashlight ideal for hunting and illuminating distant targets.

All flashlight parameters (luminous flux, battery runtime, waterproofness, beam distance, and impact resistance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Fenix TK30R Flashlight Parameters

• It uses a white laser with LEP (laser excited phosphor) technology with a lifespan of 50,000 hours.
• Three lighting modes: 500 lumens (3.5 hours) -> 100 lumens (8.8 hours) -> Strobe 500 lumens.
• Special optics for a light beam with a range of 1500 meters (600,000 cd).
• Class 1 Laser.
• Electronics with digital output regulation, reverse polarity protection, and battery over-discharge protection.
• Powered by one 21700 6000 mAh Li-ion battery (included in the package).
• Max. battery diameter 22.0 mm, max. battery length 77.0 mm.
• Dimensions 18.4 cm (length) x 4 cm (head diameter) x 2.54 cm (body diameter).
• Intelligent overheat protection.
• Flashlight body made of A6061-T6 aircraft-grade aluminum alloy.
• Durable, hard-scratch resistant surface - Type III hard anodized.
• Impact resistant from a 1-meter drop.
• Wear-resistant trapezoidal threads.
• Weight 250 grams (including battery).
• Waterproof and dustproof according to IP68 standard (tested underwater at a depth of 2 meters).
• Hardened, ultra-clear glass lens with anti-reflective coating.
• Battery held between two springs - tolerates recoil when used on a weapon without problems.
• Tactical tail switch (instant strobe function by holding the button).
• Rotary switch for selecting between high and low output and locking the controls.
• Included in the package: ARB-L21-6000 battery, USB-C charging cable, wrist lanyard, belt holster, spare O-ring.
• Optional accessories available for purchase: AER-05 remote pressure switch, AOT-04 red or white traffic cone, AOF-L red filter, AOD-M white diffuser, AOD-04 white diffuser.
• The following accessories are also compatible with the flashlight: ALG-00 quick-release rail mount, ALG-15 quick-release rail mount, Fenix ALG-16 M-LOK mount, Fenix ALG-18 head mount, metal magnetic head mount, plastic magnetic head mount, scope mount, metal scope mount.
• A USB AC adapter and a USB car adapter can also be purchased separately.

Fenix TK30R Flashlight Operation

The flashlight may come with an insulating cap on the battery from the factory. Remove it from the battery before first use.

Turning on when the flashlight is unlocked: press and hold the tactical switch at the tail of the flashlight for momentary silent illumination; the light will turn off when the switch is released. Fully press the tactical switch for continuous on/off.

Turning on when the flashlight is locked: turn the selector switch from the Lock position to the Low or High output position to turn on the light.

Selecting output: rotate the selector switch on the tail to choose between Lock <-> Low <-> High positions, and select the desired output or lock (and turn off) the flashlight.

Activating strobe: on an unlocked flashlight, fully press the tactical switch for 0.5 seconds to activate strobe mode. Briefly press the tactical switch again to return to steady illumination.

Battery level indication - the charge indicator is hidden under the protective cap of the charging port for tactical reasons, so the cap must be unscrewed to check it. The flashlight always indicates the battery status for three seconds after turning it on. Green indicates sufficient charge (100% - 85%), flashing green (85% - 50%), solid red (50% - 25%), and flashing red indicates a critically low battery (25% - 1%). If the battery is low, the flashlight will automatically switch to lower output modes.

Charging the flashlight - Unscrew the protective cap under the flashlight head and connect it to a computer, AC USB adapter, or car USB adapter (not included) using the included USB-C cable. A universal mobile phone charger with a USB-C connector can also be used for charging. During charging, the indicator LED near the charging port glows red; it turns green when fully charged. Charging a fully depleted battery takes approximately 3.5 hours. The Li-ion battery used does not suffer from a memory effect, so the flashlight can be recharged at any time. The flashlight cannot be turned on while charging.

Intelligent overheat protection - if the flashlight temperature exceeds 60 °C, it will automatically reduce the output in gradual steps.

 Notice

• Use only high-quality rechargeable 21700 Li-ion batteries with protection circuits.
• Insert the battery with the positive pole facing the head of the flashlight.
• If the protective rubber O-rings appear damaged after prolonged use, replace them. The O-rings should also be lubricated to prevent rubber erosion. By following these rules, the flashlight will be properly protected against water.
• If the flashlight is blinking, not switching to higher output modes, or not turning on, it may be due to one of the following reasons:
  
  • The battery is nearly depleted - charge or replace it.
  • The contacts inside the flashlight are dirty - clean them with a cotton swab dipped in alcohol.
  • The head, body, or tail cap of the flashlight are loose; tighten them.

Beam distance: 1500m
Max. runtime: 8.8h
Output: 500lm
Number of modes: 3
Weight: 250g
Power source: 1x 21700
Charging: USB rechargeable
Light source: LEP (laser excited phosphor)
Waterproof: IP68 (2m submersible)