Fenix LR60R rechargeable flashlight

The ultra-powerful rechargeable flashlight Fenix LR60R delivers an extreme luminous flux of up to 21000 lumens and a beam distance of up to 1085 meters. This performance is achieved using one premium Luminus SFT-70 LED and twelve Luminus SST-40 LEDs, powered by an internal high-current Li-ion battery pack with a capacity of 57.6 Wh (4x 4000 mAh). The battery pack is charged directly in the flashlight via a modern USB-C connector. The flashlight is operated by a rotary ring, which allows switching between modes in two settings: search (up to 21000 lm) and camping (up to 15000 lm).

 

The flashlight is equipped with an OLED status display that shows the selected output mode, the remaining runtime in that mode, and the battery charge level. Furthermore, the flashlight can be used as a power bank to charge other USB devices. This searchlight is suitable for example for security of large areas, professional use, or search and rescue operations, and for all flashlight enthusiasts.

 

All flashlight parameters (luminous flux, battery runtime, waterproofness, beam distance, and impact resistance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Fenix LR60R Flashlight Parameters

• The light source is one powerful Luminus SFT-70 LED and twelve Luminus SST-40 LEDs with a lifespan of 50,000 hours.
• A total of 10 lighting modes:
  
  • Search mode: 21000 lumens (1.8 hours) -> 3000 lumens (3.75 hours) -> 1000 lumens (10.7 hours) -> 300 lumens (24.3 hours) -> 50 lumens (113 hours).
  • Camping mode: 15000 lumens (2.17 hours) -> 6000 lumens (3 hours) -> 2000 lumens (5.4 hours) and SOS 300 lumens -> Strobe 9000 lumens.
• It is powered by a replaceable high-current Li-ion battery pack ARB-L56-4000 composed of 4x 4000 mAh cells (57.6 Wh).
• Charging via USB-C with power up to 45W. USB-A output with power bank function. Supports PD, QC2.0, QC3.0, FCP, AFC, SCP fast charging protocols for both charging and discharging.
• OLED display shows the selected output mode, remaining runtime in that mode, and battery charge level.
• Rotary ring for quick switching of output modes.
• Digital output regulation, overheat protection.
• Combined TURBO mode of both reflectors offers a beam distance of up to 1085 meters (294267 cd), wide reflectors illuminate up to 352 meters (30896 cd).
• The electronics are equipped with a protection function against deep battery discharge; when the voltage drops below a certain level, it automatically switches to a lower output mode.
• Dimensions 20.8 cm (length) x 6.25 cm (body diameter) x 9.1 cm (reflector diameter).
• Weight 1500 grams.
• Detachable metal handle, tripod socket, and shoulder strap allow the flashlight to be used in various situations.
• Durable, hard-to-scratch surface - Type III hard anodized.
• Impact resistant from a fall of 1 meter.
• Waterproof and dustproof according to IP68 standard (tested underwater at a depth of 2 meters for 4 hours).
• Hardened ultra-clear glass lens with anti-reflective coating.
• The package also includes a USB-C charging cable, a spare o-ring, a shoulder strap with a screw eye for hanging, and a wrist strap.
• A fast-charging GAN5 adapter, a USB AC adapter, a USB car adapter, and a colored USB-C cable can also be purchased for the flashlight.

Usage

Turning on/off and switching output modes - the search mode is activated by turning the control ring at the head of the flashlight clockwise; the camping mode is activated by turning the ring counterclockwise. Turning the ring in the selected direction switches through the other lighting modes of the selected mode. Turning the ring to the middle position turns the flashlight off again.

Intelligent proximity sensor - the flashlight has a built-in protection circuit. When the reflector gets within approximately 60 mm of the illuminated object for more than 1 second, the flashlight automatically reduces the output to 50 lumens to prevent damage to the object from strong light and glare from reflected light. When the reflector is more than 1.2 seconds away from the illuminated object, the flashlight automatically restores the previously used output level. The sensor is activated as follows: Turn the mechanical rotary switch to the off → 50 lumens → off positions three times within 3 seconds. "ON" will be displayed on the OLED screen, and the flashlight will blink twice in the 50 lumens mode, indicating that the sensor function is activated. To deactivate, turn the mechanical rotary switch to the off → 50 lumens → off positions three times within 3 seconds. "OFF" will be displayed on the OLED screen, and the flashlight will blink eight times in the 50 lumens mode, indicating that the sensor function is deactivated.

Charging - turn off the flashlight and open the dust cover of the charging connector, plug the USB Type-C cable into the flashlight, and then connect the other end of the charging cable to any USB adapter. The charging status is displayed on the OLED screen during charging. The normal charging time is approximately 1.5 hours when using a 40W or higher fast-charging USB adapter. The flashlight can only be used in the 50 lumens mode during charging. After charging is complete, remember to seal the dust cover.

Power bank function - turn off the light, open the dust cover, and insert the USB cable into the USB Type-A output port or the universal USB-C port on the flashlight, then connect the other end of the cable to the USB device to be charged. The current battery capacity is displayed on the OLED screen during discharge, and the flashlight can be used in all output modes. After charging the external USB device is complete, remember to seal the dust cover.

OLED display - after turning on the flashlight, the battery capacity, selected mode, and remaining runtime are displayed on the OLED screen. If the battery is charged to less than 10%, the battery icon will start flashing on the display. If the charge level is below 5%, a large flashing empty battery icon will appear on the display to alert the user that the flashlight needs to be charged as soon as possible.

Intelligent overheat protection - the flashlight heats up during prolonged use of high output levels. When the flashlight reaches a temperature of 60 °C or higher, it automatically reduces the output to lower the temperature. When the temperature drops below 60 °C, high output levels can be used again.

Low battery warning - when the battery voltage drops below the set level, the flashlight is programmed to switch to a lower output level until the 50 lumens mode is reached. After reducing the output to 50 lumens, the battery icon on the OLED display will start flashing to remind you to recharge the battery in time.

Notice

• Do not disassemble the sealed parts of the flashlight yourself, as this will void the warranty.
• Do not attempt to charge the flashlight if it does not have a battery inserted.
• Prolonged use may lead to wear of the O-ring. To maintain proper waterproof sealing, replace the ring with a spare.
• Regular cleaning of electrical contacts ensures trouble-free operation of the flashlight, as dirty contacts can cause flickering, intermittent lighting, or even malfunction of the flashlight due to the following reasons:
  
  • The battery is discharged. Charge it or replace it with a charged one.
  • The electrical contacts inside the flashlight are dirty; clean them with a cotton swab dipped in alcohol.

Output: 21000lm

Beam Distance: 1085m

Max. Runtime: 113h

Number of Modes: 10

Weight: 1500g

Power Source: 1x ARB-L56-4000

Light Source: Luminus SFT-70

Light Source: Luminus SST-40

Waterproofness: IP68 (2m submersible)