Fenix LR35R PRO rechargeable flashlight, 10000 lm, black

Fenix LR35R PRO is an extremely powerful and versatile flashlight designed for exceptional performance in every situation. It provides a dazzling luminous flux of up to 10,000 lumens and a maximum beam distance of 500 meters. For maximum versatility, it combines several specialized light sources: a spotlight with a power of 5000 lumens, a floodlight with a power of 8000 lumens, red light (260 lm), and a powerful 3.7 W UV light.

Operation is quick and intuitive thanks to the combination of a rotary switch for smooth brightness adjustment and an electronic switch for mode switching. Power is supplied by two high-capacity 21700 Li-ion batteries with a capacity of 6000 mAh (included in the package), providing up to 135 hours of runtime. Thanks to the bidirectional USB-C port with 18W fast charging support, the flashlight can not only be quickly recharged but also used as a power bank for your other devices, such as a smartphone.

Operational safety is ensured by intelligent overheat protection, which automatically reduces output at high temperatures. The stainless steel strike bezel is equipped with tungsten steel spikes, allowing for rapid glass breaking in emergency situations. A lockout function to prevent accidental activation is also included. The flashlight is built to withstand even the most demanding conditions – it is fully dustproof and waterproof according to IP68 standard and impact-resistant from a 1-meter drop. It is therefore an ideal companion for search and rescue operations, outdoor adventures, and professional use.

All flashlight parameters (luminous flux, battery runtime, waterproofness, beam distance, and impact resistance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Fenix LR35R PRO Flashlight Parameters

• Uses eight premium Luminus SST-25 LEDs, four SFT-25 LEDs, two OSRAM GR QSSPA1.23 LEDs, and one Luminus SST-10 UV LED, all with a lifespan of 50,000 hours.
• Continuously adjustable white light output:
  
  • Spotlight and floodlight: continuously adjustable output from 10000 lumens down to 80 lumens with a runtime of 2.6 – 61 hours.
  • Spotlight: continuously adjustable output from 5000 down to 30 lumens with a runtime of 2.7 – 135 hours.
  • Floodlight: continuously adjustable output from 8000 down to 50 lumens with a runtime of 2.7 – 103 hours.
  • Two flashing modes (without continuous adjustment): strobe 10000 lumens (/) and SOS 30 lumens (270 hours).
• Continuously adjustable red light from 260 down to 10 lumens with a runtime of 6.8 - 290 hours and a flashing function from 260 lumens - 10 lumens.
• 365 nm UV light: radiant flux 3700 mW (20 hours) for wide-area and precise UV detection.
• Runtime figures are measured with the included batteries.
• The flashlight is powered by two 21700 Li-ion batteries with a capacity of 6000 mAh (Fenix ARB-L21-6000), which are included in the package.
• Max. battery diameter 22.3 mm, max. battery length 77.0 mm.
• The flashlight can be powered by only one battery, but the floodlight will have half its output.
• Output in the highest modes is regulated by overheat protection.
• Batteries can be recharged via the fast waterproof USB-C port directly in the flashlight.
• Charging time with a powerful (at least 27W) USB source is approximately 4 hours. With weaker sources, it may be longer.
• Battery charge level indication.
• Spotlight with a beam distance of up to 500 meters (62,260 cd) and a continuous wide beam with a beam distance of up to 213 meters (11,333 cd), or their combination with a beam distance of 445 meters (48,844 cd).
• Digitally regulated for constant brightness.
• Intelligent overheat protection.
• Intelligent proximity sensor.
• The flashlight automatically remembers the last selected lighting mode.
• Protection against accidental reverse battery insertion (polarity).
• Sturdy metal clip.
• Made of aircraft-grade hardened aluminum. Trapezoidal threads highly resistant to wear.
• Durable, hard-to-scratch surface - Type III hard anodized.
• Impact resistant from a 1-meter drop.
• Waterproof and dustproof according to IP68 standard (tested underwater at a depth of 2 meters for 30 minutes).
• Dimensions 14.3 cm (length) x 5.5 cm (head diameter).
• Weight 457 grams including batteries.
• Toughened ultra-clear glass lens with anti-reflective coating.
• The flashlight comes with a wrist strap, holster, spare o-ring, 2x Fenix ARB-L21-6000 batteries, and a USB-C charging cable.
• A mains USB adapter, car USB adapter, and fast-charging USB adapter can also be purchased separately.

Fenix LR35R PRO Flashlight Usage

On/Off - When the flashlight is locked, turn the rotary switch clockwise to turn it on to white light. To turn off and lock, turn the rotary switch counter-clockwise until it stops. When the flashlight is off or locked, double-press the electronic switch quickly to turn on the colored light. When the flashlight is unlocked, press and hold the electronic switch for 0.5 seconds to turn it on/off.

Mode Switching - When the flashlight is on, press the electronic switch to cycle through white light modes: Spotlight → Floodlight → Spotlight + Floodlight combination. When the colored light is on, press the switch to cycle through modes: Red Light → Red Flashing → UV Light. When the flashlight is unlocked, press and hold the electronic switch for 1.2 seconds to enter the flashing modes. Individual presses of the switch can then cycle between strobe and SOS. Pressing and holding the electronic switch again will return to the last steady lighting mode.

Stepless Brightness Adjustment - In white, red, and UV light modes, brightness can be steplessly adjusted using the rotary switch. Turning clockwise increases brightness, counter-clockwise decreases it.

Lock/Unlock - To lock the flashlight, turn the rotary switch counter-clockwise until it stops. To unlock and turn on the flashlight, turn the rotary switch clockwise.

Memory for Last Set Mode - The flashlight automatically remembers the last selected lighting mode. When turned on again by turning the rotary switch or holding the electronic switch, the previously used white light mode will be restored. When turned on again by double-pressing the electronic switch, the previously used colored light mode will be restored. The flashlight does not remember the previously used brightness level.

Battery Replacement - Unscrew the flashlight body and insert both batteries with the positive pole facing the reflector. Then, fully tighten the body again. The flashlight can also be used with only one battery inserted, but its output will be reduced.

Charging - Turn off the flashlight, open the dust cover, and plug the USB-C charging cable into the flashlight's charging port. After charging is complete, close the dust cover again. During charging, five green indicator lights flash from left to right to indicate the charging status. The normal charging time for the included ARB-L21-6000 batteries is 4 hours using a 27W source. Charging the flashlight without batteries inside is prohibited.

Power Bank Function - Open the dust cover and plug the USB-C charging cable into the flashlight's charging port, then connect the other end of the cable to the device you want to charge. After charging is complete, replace the dust cover. During discharge, five green indicator lights flash from right to left to indicate the discharge status.

Note: The flashlight can be used during both charging and discharging, but the maximum available output is limited to 200 to 900 lumens depending on the current charge level and the mode used.

Battery Charge Level Indication - When the flashlight is turned on or the switch is pressed while the flashlight is off, the indicator lights above the electronic switch will illuminate for three seconds. If five lights are on, the batteries are charged to over 80%. Four lights indicate 60-80% capacity, three lights 40-60%, two lights 20-40%, and one light 1-20%.

Low Battery Warning - If the battery voltage drops below the set level, the flashlight will reduce the brightness to a lower level. Once the lowest output is reached, the battery level indicator will start flashing to remind you to recharge or replace the batteries.

Intelligent Proximity Sensor - The flashlight has a built-in safety circuit. When the reflector gets within 6 cm of an illuminated object for more than 1.5 seconds, it automatically reduces the output to 50 lumens to prevent damage to the object from strong light and glare from reflected light. When the object is moved away, the original output is automatically restored.

• Disabling/Enabling Proximity Sensor - To disable the function, lock the flashlight and press and hold the electronic switch for 6 seconds. Disabling the function is indicated by the flashlight flashing six times at 50 lumens. The function is re-enabled by pressing and holding the switch for 6 seconds while the flashlight is locked. Enabling the function is indicated by the flashlight flashing twice at 50 lumens.

Note:

• After changing the current mode, it takes approximately 1 second for the flashlight to recalculate the remaining runtime. During this time, 'CHECK' will be displayed on the OLED screen.
• If the battery level is 5% or lower, an empty battery icon will be displayed. In this state, only the low floodlight mode can be used.
• After replacing the batteries, the new runtime calculation takes 5 to 8 seconds, 'LOADING' will be displayed, and the flashlight cannot be used during this time.

Intelligent Overheat Protection - When the flashlight is used for extended periods on high output modes, a large amount of heat accumulates. When the flashlight reaches 55°C or higher, it automatically reduces the output by several lumens to lower the temperature. When the temperature drops below 55°C, the output will gradually increase again.

Warnings

• Keep this flashlight out of reach of children!
• Do not shine the flashlight directly into anyone's eyes!
• Do not shine the flashlight on flammable objects from close proximity to avoid damage or fire hazards due to high temperature!
• Do not use this flashlight improperly, e.g., by biting it in your mouth, to avoid injury or life-threatening situations in case of flashlight or battery failure!
• This flashlight accumulates a large amount of heat during operation in high modes, resulting in a high surface temperature. Ensure safe use to avoid burns.
• Turn off and lock the flashlight to prevent accidental activation if the flashlight is placed in an enclosed and hot environment, such as pockets and backpacks!
• Do not disassemble sealed parts of the flashlight yourself, as this will void the warranty.
• Never use different discharged batteries or batteries with different capacities.
• Use only high-current 21700 Li-ion batteries with protection circuits; otherwise, the flashlight may not function correctly.
• If the protective rubber rings appear damaged after prolonged use, replace them. The rings also need to be lubricated to prevent rubber erosion. By following these rules, the flashlight will be properly protected against water.
• If the flashlight flashes, does not switch to higher output modes, or does not turn on, it may be due to one of the following reasons:
  
  • Batteries are nearly discharged – replace or recharge them.
  • Contacts inside the flashlight are dirty – clean them with an alcohol-soaked cotton swab.
  • The flashlight body is loose – apply lubricant to the sealing rings and tighten.

Output: 10000lm
Max. Runtime: 135h
Beam Distance: 500m
Weight: 457g
Number of Modes: 100
Power Source: 2x 21700
Light Source: OSRAM GR QSSPA1.23
Light Source: Luminus SST-25
Waterproof: IP68 (2m submersible)