Fenix E03R V2.0 rechargeable flashlight, gray

Fenix E03R V2.0 is the successor to the successful miniature rechargeable flashlight that can be carried on keys or in a handbag. Despite its minimal dimensions and a weight of only 30 grams, it offers a high luminous flux of up to 500 lumens (ANSI). The light beam evenly illuminates a wide area up to a distance of 90 meters. The power is supplied by an integrated Li-pol battery with a capacity of 400 mAh, which is charged via a modern USB-C connector on the side of the flashlight. There are a total of four white light modes and two red light modes with a maximum runtime of up to 30 hours in the lowest mode. A unique novelty is the so-called Breathing light, a pulsating light around the switch button with a power of 1 lumen, which you can use for unobtrusive signaling or identifying the location of the flashlight and thus your keychain. The flashlight comes with a keychain ring, so you can easily carry it with you at all times. The battery charge level indicator in the button is also practical. You will always make someone happy with this useful gift.

All flashlight parameters (luminous flux, battery runtime, waterproofness, impact resistance, and beam distance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Fenix E03R V2.0 Flashlight Parameters

• Two white LEDs MATCH CA18 and one red LED Everlight 2835 are used. All with a lifespan of 50,000 hours.
• Four white light modes: 500 lumens (1.3 hours) -> 150 lumens (2 hours) -> 30 lumens (6.5 hours) -> 5 lumens (30 hours).
• Two red light modes: 5 lumens -> red flashing (5 lumens).
• Pulsating light around the switch button with a power of 1 lumen (Breathing light).
• The flashlight is powered by a built-in rechargeable lithium-polymer battery with a capacity of 400 mAh.
• Battery charge level indication in the button.
• Charging via a modern USB-C connector.
• Memory for the last set white light output mode.
• Intelligent overheat protection.
• CNC milled body made of aluminum alloy with a scratch-resistant Type III hard anodized finish.
• Dimensions 5.25 cm (length) x 2.6 cm (width) x 1.3 cm (height).
• Beam distance 90 meters (2082 cd).
• Weight 30 grams (including battery).
• Waterproof according to IP66 standard (spraying with strong jets of water from all directions).
• Impact resistant from a fall of 1 meter.
• The package includes a keychain ring and a charging USB-C cable.
• A USB-C cable, a colored USB-C cable, or a micro-USB to USB-C adapter can be purchased separately.

Usage

To turn on or off, press and hold the side button for approximately 0.5 seconds. To turn on the red light, press and hold the button for 1.2 seconds. You can switch output modes at any time during operation by pressing the side button. To turn on the Breathing light, turn off the flashlight and double-click the button quickly.

The control button can be locked to prevent accidental activation, e.g., during transport in luggage - to lock, turn off the flashlight and hold the button for 3 seconds. The flashlight will then flash twice to indicate it is locked. To unlock, hold the button again for 3 seconds.

Battery charge indication - with the flashlight off, briefly press the button once, and a small LED in the button will light up for three seconds. Green light indicates battery charged at 100-85%, green flashing 85-50%, red light indicates battery charged at 50-25%, and red flashing indicates battery charged at less than 25%.

Overheat protection - if the flashlight temperature exceeds 60°C, the output will automatically decrease. Once the temperature drops below 60°C, the highest output can be used again.

Low battery warning - the flashlight will gradually and automatically switch to the lowest output mode, and the indicator LED in the switch button will start flashing red.

Charging

• Open the rubber cover of the USB-C connector and connect the flashlight with a USB-C cable to a computer, mains USB adapter, or car USB adapter. Any mobile phone charger with a USB-C connector can also be used for charging.
• During charging, the indicator LED in the button glows red; after full charging, it glows green.
• Charging a fully discharged battery takes approximately 2 hours.
• The Li-pol battery used does not suffer from a memory effect, so the flashlight can be charged at any time.
• Seal the USB connector cover thoroughly after each charge.

Warning

• Do not disassemble sealed parts yourself, as this will void the warranty.
• In humid environments, ensure that the USB-C connector cover is properly seated in the flashlight.
• If the flashlight does not switch to higher output modes or does not turn on, the battery is discharged - charge the flashlight.

Max. runtime: 30h
Output: 500lm
Number of modes: 6
Weight: 30g
Beam distance: 90m
Power supply: Internal battery
Light source: Everlight 2835
Light source: MATCH CA18
Waterproof: IP66 (heavy rain)