Fenix WF30RE rechargeable flashlight, 300 lm, black

The professional rechargeable flashlight Fenix WF30RE is equipped with ATEX/IECex certification for use in explosive environments. The flashlight is powered by a specially modified Li-ion battery ARB-L21-3000Ex with a capacity of 3000 mAh and provides a luminous flux of up to 300 lumens with a beam distance of 149 meters. The battery is recharged directly in the flashlight via a USB-C connector. The flashlight body is made of high-strength aerospace aluminum with impact resistance. The flashlight is designed especially for firefighters and rescuers, and is also suitable as a work light for industrial plants where explosive dust and gases may be present. Examples include chemical plants, refineries, textile mills, paper mills, mills, metallurgical plants, power plants, and other facilities.

Certifications:

• Usable in zones 1-2 for explosive gases and zones 21-22 for explosive dust.
• Full text of certifications:
• IECEx: IECEx TUR 18.0042X:
  
  • Ex ib IIC T4 Gb
  • Ex ib IIIC T130°C Db
• ATEX: TÜV 18 ATEX 8252X:
  
  • II 2G Ex ib IIC T4 Gb
  • II 2D Ex ib IIIC T130°C Db
• The flashlight also holds CSA, NEPSI, and GRGT certifications.

Parameters of the WF30RE ATEX work flashlight:

• It uses a powerful Cree XP-G3 LED with a neutral light tint and a lifespan of 50,000 hours.
• Five output modes: 300 lumens (7.3 hours) -> 100 lumens (22.8 hours) -> 30 lumens (68 hours) -> 5 lumens (313.3 hours) -> SOS (30 lumens).
• It uses a special Fenix ARB-L21-3000Ex Li-ion battery with a capacity of 3000 mAh. This is a modified type certified for explosive environments.
• The battery is recharged directly in the flashlight via a modern USB-C connector.
• The electronics are equipped with a protection function against deep battery discharge; when the voltage drops below a certain level, it automatically switches to a lower output mode.
• The flashlight has memory and can be turned on in the last used mode, except for emergency modes (Eco and SOS).
• Battery level indication.
• Made of aerospace-grade A6061-T6 hardened aluminum.
• Durable, hard-to-scratch surface – Type III hard anodized.
• Impact resistant from a fall of 1 meter.
• Waterproof and dustproof according to IP68 standard (tested underwater at a depth of 2 meters for 30 minutes).
• Textured aluminum reflector for a perfect light beam with a beam distance of 149 meters (5572 cd).
• Dimensions 15.17 cm (length) x 3.4 cm (head diameter) x 2.8 cm (body diameter).
• Weight 218 grams (including battery).
• Package includes: Fenix WF30RE flashlight, Fenix ARB-L21-3000Ex battery, USB charging adapter, USB-C charging cable, EU Declaration of Conformity, spare O-ring, wrist strap, user manual, warranty card.
• The Fenix ALD-05 strap can be purchased separately for using the flashlight on a helmet.

Operation:

With the flashlight off, press and hold the switch for 0.5 seconds to turn it on in the last used normal output mode (General mode). With the flashlight off, double-click the switch quickly to turn it on in the emergency mode of 5 lumens (Extreme mode). You can switch between output modes at any time during operation by pressing the side button within the selected mode group. With the flashlight on, press and hold the switch for 0.5 seconds to turn it off.

Battery level indication – press the flashlight button (with the flashlight off). If the indicator LED is green, the battery is charged to over 85%. Flashing green means 50-85% capacity. If it is red, it is charged to 25-50%. Flashing red means less than 25% battery capacity remains.

Low battery warning – the flashlight will gradually and automatically switch to the lowest mode, and the indicator in the button will start flashing red.

Charging – Open the dust cover and connect the USB-C charging cable to the charging port. After charging is complete, replace the dust cover. The indicator in the button glows red during charging. It turns green when fully charged. Do not charge the flashlight in an explosive environment. Use the included USB charging adapter for safety during charging.

To replace the battery, unscrew the end cap of the flashlight using an 8 mm Allen key. Never replace the battery in an explosive environment.

Warning

• Perform all servicing, charging, and battery replacements outside of explosive environments!
• Use only the manufacturer-certified Fenix battery.
• If the sealing rubber ring on the flashlight's tail cap thread is damaged, replace it with the spare one from the flashlight package.
• If the flashlight is flashing, not switching to higher output modes, or not turning on, it may be due to one of the following reasons:
  
  • The battery is discharged; charge or replace it.

Warranty

Five-year warranty on the flashlight, two-year warranty on the battery.

Beam distance: 149m
Max. runtime: 313.3h
Output: 300lm
Weight: 218g
Number of modes: 5
Power source: 1x ARB-L21-3000Ex
Light source: Cree XP-G3
Waterproof: IP68 (2m submersible)