Fenix PD25R rechargeable flashlight, 800 lm, black

The Fenix PD25R rechargeable pocket flashlight offers a luminous flux of up to 800 lumens (ANSI) and a beam distance of up to 250 meters. It is powered by a rechargeable RCR123A battery (included in the package), which is charged directly in the flashlight via a USB-C connector located on the side. The charging port is covered by a screw-on cap, making it perfectly protected against water and dirt. The battery can also be replaced with a disposable CR123A battery in emergencies. The light source is a top-of-the-line Luminus SST-20 LED with a lifespan of 50,000 hours. The tail cap of the flashlight features a tactical switch for quick on/off, and power modes are switched using the second button on the side. The flashlight has six lighting modes, including a flashing strobe. In the lowest mode, it can last up to 70 hours. With a weight of only 78 grams, the flashlight can be carried with you at all times (EDC) for everyday use, at work, or during sports.

All flashlight parameters (luminous flux, battery runtime, waterproofness, beam distance, and impact resistance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Fenix PD25R Flashlight Parameters

• Features a premium high-performance Luminus SST-20 LED with a lifespan of 50,000 hours.
• Six lighting modes: 800 lumens (44 minutes) -> 350 lumens (1.5 hours) -> 150 lumens (2.8 hours) -> 30 lumens (16 hours) -> 5 lumens (70 hours) -> 800 lumens strobe.
• Runtime is measured with a rechargeable Li-ion RCR123A battery with a capacity of 700 mAh, which is included in the package.
• Max. battery diameter 16.9 mm, max. battery length 37.0 mm.
• A disposable 3V CR123A battery can also be used for power in emergencies, but the highest output will not be available.
• Digitally regulated for constant brightness, intelligent overheat protection.
• Well-focused beam with a range of up to 250 meters (15,530 cd).
• Dimensions: 9.2 cm (length) x 2.4 cm (diameter).
• Weight: 78 grams (including battery).
• Made from A6061-T6 aircraft-grade aluminum.
• The flashlight has memory and will always turn on in the last used mode (does not apply to strobe mode).
• Double-sided clip for attachment to a pocket, cap, or Molle system.
• Durable finish - Type III hard anodized.
• Impact resistant from a fall of 1 meter.
• Waterproof and dustproof according to IP68 standard (tested underwater at a depth of 2 meters for 30 minutes).
• Hardened ultra-clear glass lens with anti-reflective coating.
• Tactical tail switch (momentary on/off function).
• Included accessories: wrist lanyard, double-sided steel clip, belt holster, spare O-rings, Fenix ARB-L16-700P / RCR123A battery.
• Optional original accessory: AOD-S diffuser can be purchased separately.
• Compatible accessories include: ALW-01 rotating wrist holder, AB02 rotating holster, LampFix helmet mount, bicycle mount, BikeBlock bicycle helmet mount, Fenix bicycle mount, or a replacement RCR123A battery with USB-C connector or a replacement battery with a higher capacity of 950 mAh.

Usage

The flashlight may come with an insulating cap on the battery from the factory. Remove it from the battery before first use.

To turn on, press the tactical tail switch; hold the button for momentary activation. If the flashlight is on, you can switch between power modes at any time by pressing the side button near the head. To switch to strobe mode, hold the side button for approximately 0.5 seconds.

Charging - Unscrew the protective cap under the flashlight head and connect it to a computer, AC USB adapter, or car USB adapter (not included) using the included USB-C cable. A standard mobile phone charger with a USB-C connector can also be used for charging. The indicator LED in the button glows red during charging and green when fully charged. Charging a fully depleted battery takes about 2 hours. The Li-ion battery used does not suffer from a memory effect, so the flashlight can be recharged at any time. While charging, the flashlight can only be turned on in the lowest mode by holding the side button for 0.5 seconds.

Intelligent overheat protection - if the flashlight temperature exceeds 60°C, it will automatically reduce output in gradual steps.

Battery level indication - the indicator LED in the side button activates for three seconds each time the flashlight is turned on. If the indicator LED is solid green, the battery is charged to over 85%. Flashing green indicates 50-85% capacity. If it is solid red, it is charged to 25-50%. Flashing red indicates less than 25% battery capacity remaining (only works when using an RCR123A / 16340 Li-ion battery).

Low battery warning - the flashlight will automatically switch to the lowest mode, and the indicator LED in the button will flash red in the lowest mode. This indicates the need to charge or replace the battery.

Notice

• Do not disassemble the sealed part in the flashlight head yourself, as this will void the warranty.
• Use only high-quality CR123A or RCR123A batteries.
• If the protective rubber rings appear damaged after prolonged use, replace them. The rings should also be lubricated to prevent rubber erosion. Adhering to these rules will ensure the flashlight is properly protected against water.
• If the flashlight is flickering, not switching to higher power modes, or not turning on, it may be due to one of the following reasons:

• • The battery is almost depleted – charge or replace the battery.
  • The contacts inside the flashlight are dirty – clean them with a cotton swab dipped in alcohol.
  • The tail cap of the flashlight is loose – tighten it.

Warranty

Five-year warranty on the flashlight, two years on the battery.

Weight: 78g
Number of modes: 6
Beam distance: 250m
Output: 800lm
Max. runtime: 70h
Power source: 1x CR123A
Power source: 1x RCR123A
Light source: Luminus SST-20
Waterproof rating: IP68 (2m submersible)