Fenix E06R rechargeable flashlight, 700 lm, turquoise

Fenix E06R Rechargeable Flashlight

Fenix E06R is a larger version of the successful miniature rechargeable flashlight Fenix E03R V2.0. Compared to it, it not only has higher performance but also ultraviolet light and a laser pointer. Despite its compact dimensions and a weight of only 54 grams, it offers a high luminous flux of up to 700 lumens (ANSI). The light beam evenly illuminates a wide area up to a distance of 110 meters. The power is supplied by an integrated battery with a capacity of 750 mAh, which is charged via a modern USB-C connector on the side of the flashlight. There are a total of four white light modes, UV light with a wavelength of 365 nm with a power of 580 mW, a red laser (pointer ≤0.39 mW), and several modes of so-called Breathing light - lights around the switch button with a power of 0.5 to 1 lumen, which you can use for inconspicuous signaling or identifying the flashlight's location. The flashlight comes with a sturdy clip, so you can attach it to a pocket, backpack strap, or cap brim, freeing up your hands while lighting. Thanks to the magnet in the base of the flashlight, you can attach it to anything iron. The battery charge status indicator in the button is also practical. This pocket flashlight is great for EDC and thanks to its small size, flat shape, and weight, you can always have it with you.

All flashlight parameters (luminous flux, battery operating time, water resistance, impact resistance, and beam distance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Fenix E06R Flashlight Parameters

• Two Luminus SST-12 white LEDs, a Luminus SST-08 UV diode with a wavelength of 365 nm, and a Class 1 red laser are used, all with a lifespan of 50,000 hours.
• Four white light modes: 700 lumens (1.3 hours) -> 150 lumens (2.8 hours) -> 30 lumens (12 hours) -> 5 lumens (60 hours).
• UV light: 580 mW / 365 nm.
• Red laser (pointer): ≤0.39 mW.
• Pulsating light around the switch button (Breathing light): red flashing, blue flashing, red and blue pulsing at 1 lumen, and RGB pulsing at 0.5 lumens.
• The flashlight is powered by a built-in rechargeable battery with a capacity of 750 mAh.
• Battery charge status indication in the button.
• Charging via a modern USB-C connector, which is waterproof inside.
• Memory for the last set white light output mode.
• Intelligent overheat protection.
• Clip for attaching to a backpack strap, pocket, cap brim, etc.
• CNC machined aluminum alloy body with scratch-resistant Type III hard anodized finish.
• Dimensions 6.9 cm (length) x 2.9 cm (width) x 1.6 cm (height).
• Beam distance 110 meters (3100 cd).
• Weight 54 grams (including battery).
• Waterproof according to IP66 standard (spraying with strong jets of water from all directions).
• Impact resistant from a fall of 1 meter.
• The package includes a keychain ring, a hand strap, and a charging USB-C cable.
• A micro-USB to USB-C adapter can be purchased separately.

Usage

To turn the white light on or off, press and hold the main button for approximately 0.5 seconds. You can switch between output modes at any time during operation by pressing the button. To turn on the Breathing light, turn off the flashlight and double-press the button quickly. To turn it off, press and hold for 0.5 seconds.

UV light is turned on and off by pressing and holding the purple button on the side of the flashlight for approximately 0.5 seconds.

Red laser is turned on and off by pressing and holding the red button on the side of the flashlight for approximately 0.5 seconds.

The control buttons can be locked to prevent accidental activation, for example, during transport in luggage - to lock, turn off the flashlight and press and hold both the red and purple buttons on the side of the flashlight simultaneously for 2 seconds. The flashlight will then flash twice, indicating it is locked. To unlock, press and hold both colored buttons for 2 seconds again.

Battery charge indication - with the flashlight off, briefly press the main button once, and a small LED in the button will light up for three seconds. Green light indicates battery charged at 100-85%, green flashing 85-50%, red light indicates battery charged at 50-25%, and red flashing indicates battery charged at less than 25%.

Overheat protection - if the flashlight temperature exceeds 65°C, the output will automatically decrease. Once the temperature drops below 65°C, the output will increase again.

Low battery warning - the flashlight will automatically switch to the lowest output mode, and the indicator LED in the switch button will start flashing red.

Charging

• Connect the flashlight via USB-C cable to a computer, mains USB adapter, or car USB adapter. You can also use any mobile phone charger with a USB-C connector for charging.
• During charging, the indicator LED in the button glows red; after full charge, it glows green.
• The battery used does not suffer from a memory effect, so the flashlight can be charged at any time.

Warning

• Do not disassemble sealed parts yourself, as this will void the warranty.
• If the flashlight does not switch to higher output modes or does not turn on, the battery is discharged - charge the flashlight.

Max. runtime: 60h
Output: 700lm
Number of modes: 10
Weight: 54g
Beam distance: 110m
Power supply: Internal battery
Light source: UV LED Luminus SST-08
Light source: Luminus SST-12
Water resistance: IP66 (heavy rain)