Fenix E-CP power bank with flashlight, blue

Fenix E-CP combines the function of a flashlight with a power of up to 1600 lumens and a power bank with a capacity of 5000 mAh. Power is supplied by a built-in 5000 mAh Li-ion battery, which can be recharged via a modern USB-C connector. The Luminus SST-40 LED hidden under TIR optics can illuminate up to a distance of 222 meters and in the lowest mode will last up to 504 hours. The power bank supports fast charging protocols and can charge with a power of up to 18W (5V/2.4A, 9V/2A, 12V/1.5A).

Fenix E-CP is a great portable EDC flashlight and power bank in one, for charging your mobile phone and other portable electronics. It also fits perfectly into your outdoor kit, for example, if you are going away for a longer period without access to the mains.

All flashlight parameters (luminous flux, battery runtime, waterproofness, beam distance, and impact resistance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Fenix E-CP Flashlight with Power Bank Parameters

• Premium Luminus SST-40 LED with a lifespan of 50,000 hours.
• Six power modes: 1600 lumens (2.5 hours) -> 350 lumens (8.5 hours) -> 150 lumens (20 hours) -> 30 lumens (84 hours) -> 3 lumens (504 hours) -> strobe (1600 lumens).
• Powered by a built-in 5000 mAh Li-ion battery.
• Battery charging via USB-C, charging time 2-6 hours depending on the power of the source used.
• Discharge USB-C and USB-A ports for power bank function.
• Supports fast charging protocols with a power of up to 18W for charging and discharging (5V/2.4A, 9V/2A, 12V/1.5A).
• The flashlight has memory and turns on in the last set mode (does not apply to the highest mode and strobe).
• Beam distance up to 222 meters (12400 cd).
• The flat rear side of the flashlight can be used for standing on a surface.
• Patented intelligent overheat protection (IOP).
• Waterproof according to IP68 standard (submersible up to 2 meters), charging port with internal water ingress protection.
• Impact resistant from a height of 1 meter.
• Durable A6061-T6 aluminum alloy body with HA-III anodization and increased scratch resistance.
• Dimensions 138 x 28 mm.
• Weight 170 grams (including battery).
• Package includes flashlight, wrist strap, and USB-C charging cable.
• Optional accessories can be purchased for the flashlight, such as the Fenix ALD-05 strap for helmet use, a mains USB adapter, a fast charging USB adapter, a car USB adapter, a bicycle mount, a special Fenix bicycle mount, or the BikeBlock helmet mount and ALP-10S case.

Usage

To turn the flashlight on/off, press the side button for 0.5 seconds. With the flashlight on, you can cycle through modes by simply pressing the side button: 3 - 30 - 150 - 350 - 1600 lumens. To switch to strobe mode, hold the side button for approximately 1.2 seconds.

The control button can be locked to prevent accidental activation, for example, during transport in luggage or storage - when the flashlight is off, double-press the control button quickly (within 0.5 seconds). To unlock, double-press the button quickly again.

Battery level indication - when the flashlight is off, a simple press of the side button will activate a four-segment battery level indicator hidden under the rubber cover next to the USB connectors.

Intelligent overheat protection - if the flashlight temperature exceeds 50°C, the output will automatically decrease. Once the temperature drops below 50°C, the highest output can be used again.

Charging the battery/power bank - remove the rear connector cover and plug the included cable into the USB-C port on the flashlight (USB-C connector - female), connect the other end of the cable to a computer, or a mains or car USB adapter (not included). During charging, the indicator LED glows red and turns green when fully charged. After charging the flashlight, replace the connector cover. Charging a fully discharged battery takes approximately 2 hours using an 18W source or 3.5 hours using a 5V/2A source. The flashlight can be used in 3, 30, and 150 lumen modes while charging, but this will extend the charging time.

Power bank function - turn off the flashlight and remove the rear connector cover. Plug the USB cable into one of the USB connectors (both the standard large USB-A connector and the USB-C connector function as outputs). Once the device to be charged is connected, charging will start automatically, indicated by the four-segment indicator next to the USB ports. When used as a power bank, it is also possible to illuminate in 3, 30, and 150 lumen modes simultaneously. After the charging process is complete, disconnect the device being charged and replace the protective connector cover.

Notice

• Do not disassemble the sealed parts of the flashlight yourself, as this will void the warranty.
• Use the control button lock if you carry the flashlight in luggage or a pocket, and also when storing it.

Warranty

Two-year warranty.

Beam distance:222m
Max. runtime:504h
Output:100lm
Number of modes:6
Weight:170g
Power source:Internal battery
Power source:USB charging
Light source:Luminus SST-40
Waterproof:IP68 (2m submersible)