Fenix CL20R V2.0 rechargeable light, 300 lm, green

Looking for a reliable and versatile light for camping, tenting, fishing, or evenings on the patio? You've just found it. The Fenix CL20R V2.0 is a compact and powerful rechargeable camping lantern that can be used to illuminate a room, tent, or workspace. Twenty-seven high-brightness LEDs hidden under a hemispherical diffuser provide a luminous flux of up to 300 lumens (ANSI) with a pleasant neutral white light (3700-4200 K). The advantage of this shade is a more natural and contrasting color rendering that does not tire the eyes. To create an atmosphere, the lantern is also equipped with twenty-four RGB LEDs for colorful lighting. Power is supplied by a replaceable Li-ion battery Fenix ARB-LP1900 with a capacity of 1900 mAh, which is conveniently recharged via a modern USB-C connector. In an emergency, it can be replaced with three standard AAA batteries. Thanks to its durable construction with IP65 protection, it is not afraid of rain. The bottom is equipped with a flip-out hanging loop and a strong neodymium magnet, so you can easily attach it to a tent structure, car hood, or any iron surface. With a weight of only 122 grams, it is an ideal outdoor light for travel.

All lantern parameters (luminous flux, battery runtime, waterproofness, beam distance, and impact resistance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Fenix CL20R V2.0 Lantern Parameters

• The light source is twenty-seven high-brightness 2835 LEDs with a neutral light shade and twenty-four 2020 RGB LEDs, all with a lifespan of 50,000 hours.
• Four output modes: 300 lumens (5.9 hours) -> 130 lumens (15 hours) -> 30 lumens (32 hours) -> 1 lumen (320 hours).
• Five modes of red and RGB light: RGB with smooth shade selection 25 lumens (6.7 hours) -> RGB cycling 12 lumens (10 hours) -> RGB flowing 10 lumens (10 hours) -> red light 1.5 lumens (40 hours) -> red flashing 1.5 lumens (80 hours).
• Four modes of the light ring around the switch: red 1 lumen (/) – red flashing 1 lumen (/) – RGB cycling 1 lumen (/) – RGB flowing 1 lumen (/).
• Electronics with extended runtime function.
• The included Li-ion battery with a capacity of 1900 mAh is used for power; it can be powered in an emergency by 3x AAA batteries.
• Recharging via USB-C connector.
• Made of durable plastic, the lantern is impact-resistant to drops from a height of 1.5 meters.
• Waterproof and dustproof according to IP65 standard (resistant to heavy rain and splashing water).
• The diffuser creates a wide, uniform light cone with a diameter of 12 meters.
• The bottom is equipped with a hanging loop and a neodymium magnet for attachment to any iron object.
• Dimensions 8 cm x 4.8 cm x 5.4 cm.
• Weight 122 grams (including battery).
• The lantern comes with a charging USB-C cable, Fenix ARB-LP1900 battery, and a spare o-ring.
• A spare battery, AC USB adapter, and car USB adapter can be purchased separately.

Using the Fenix CL20R V2.0

From the factory, there may be an insulating cover on the battery. Remove it before first use.

Turning on/off and switching output modes - The lantern turns on to white light by holding the switch for 0.5 seconds; to turn on the color modes, double-click the switch quickly. To turn on the light ring, press the switch once and then again within 3 seconds. Individual lighting modes of the selected lighting method are switched by pressing the switch. The lantern turns off by holding the switch for 0.5 seconds.

Switching lighting methods - Delayed off function: If the lantern is turned on to white light modes, double-click the switch quickly to activate the delayed off function. The switch's light ring will turn purple, and the lantern will turn off automatically after 20 minutes. If the lantern is turned on to color lighting modes or has an active color ring, you switch between these two lighting methods by double-clicking the switch. If the smooth color change mode is active, double-clicking the switch will pause the current color or resume the smooth color change.

Memory for the last set mode - The flashlight has memory and will always turn on in the last set white light mode, except for the highest mode. Instead, it will turn on to the second-highest mode.

Battery replacement - Pull the hanging loop on the bottom of the lantern and unscrew it clockwise to open the battery cover. Insert the battery according to the indicated polarity and then screw the battery cover back on.

Charging - Open the dustproof cover and plug the USB-C charging cable into the flashlight's charging port. After charging is complete, reseal the dustproof cover. The normal charging time is 2.5 hours. The lantern can be used in all modes during charging. During charging, the switch's light ring will gradually flash green counterclockwise. After full charge, it will light up green. To extend battery life, we recommend charging the lantern when the charge level is between 50% and 25%. If the charge level drops below 25%, immediate charging is recommended. Do not connect the charging cable to the lantern when using AAA batteries.

Battery status indication - After each turn-on, or by pressing the switch when the lantern is off, the battery status will be displayed for 3 seconds on the switch's light ring. If the ring is green, the battery is charged to more than 85%. Flashing green means 50-85% capacity. If it is red, it is charged to 25-50%. Flashing red means less than 25% battery capacity remains. This function is active only with the original Fenix ARB-LP1900 battery.

Intelligent overheat protection - During prolonged use of the lantern on a high output mode, a large amount of heat accumulates. When it reaches a temperature of 50°C or higher, it will automatically reduce the output by a few lumens to lower the temperature. When the temperature drops below 50°C, the output will gradually increase again.

Low battery warning - If the battery voltage drops below the set level, the ring around the switch will start flashing red to remind you to recharge the battery.

Notice

• Do not disassemble sealed parts yourself, as this will void the warranty.
• Remove the battery to prevent accidental activation if the lantern is placed in an enclosed and hot environment, such as pockets and backpacks!
• If the lantern flashes, does not switch to higher output modes, or does not turn on, it may be due to one of the following reasons:
  
  • The battery is discharged – charge it.

Warranty

Five-year warranty on the lantern, two years on the battery.

Output: 300lm
Max. runtime: 320h
Beam distance: 12m
Number of modes: 13
Weight: 122g
Power source: ARB-LP1900
Light source: SMD LEDs
Waterproof: IP65 (rain)