Maxxis Minion DHF 27.5x2.60" EXO+ 3C MaxxTerra tire, TR, kevlar
Maxxis Minion DHF 27.5x2.60" EXO+ 3C MaxxTerra Tire
The Minion DHF is a legend among freeride and downhill tires. It's the standard that other competing tires try to emulate. The DHF can be used front and rear (depending on trail conditions). It offers excellent riding characteristics, especially perfect cornering and great traction at high speeds. It is designed for loose natural surfaces, such as gravel, mud, and dirt. The beveled knobs in the center tread reduce rolling resistance, while the transverse grooves in the tread multiply the number of edges that hold better on loose surfaces.|
EXO+ - a combination of EXO and SilkShield protection, resistant to punctures and punctures
|
|
Triple 3C compound offers minimal rolling resistance and extremely long tread life
|
|
Cord with a fibre density of 60 TPI
|
|
TR - Tubeless ready Kevlar folding bead
|
| Colour | black |
| Tubeless | Yes |
| Material | kevlar |
| Wheel diameter | 27.5" |
| Tire width | 2.6" |
| Tire specification | trail, enduro, DH/Freeride |
| Max recommended pressure | 50 PSI/3.5 bar |
| Weight | 960 - 1110 g info |
| ETRTO | 66-584 |
| TPI | 60 |
| product ID | 84795 |
PSI - indicates the pressure to which the manufacturer recommends inflating the tire. 1 atmosphere = 14.7 PSI
TPI (EPI) - the density of the tire's skeleton fibres. The higher the TPI value, the more flexible the tire will be.
Kevlar tire - foot made of Kevlar fibres. The tire can be folded, so it is more practical when moving or storing. It is characterized by a lower weight compared to wire casings and a higher resistance to puncture.
Wire tire - bead made of wire. The tire is inflexible, it is heavier than Kevlar.
Overview of jacket sizes and markings
| ETRTO | Dimension in inches | French label | |
|---|---|---|---|
| 27,5" | 28-584 32-584 |
26 x 1 1⁄8 x 1 1⁄2 - |
650 x 28B 650 x 32B |
| 35-584 | 27.5 x 1.35 | 650B | |
| 26 x 1 3⁄8 x 1 1⁄2 | 650 x 35B | ||
| 37-584 | 27.5 x 1.40 | 650B | |
| 26 x 1 1⁄2 x 1 3⁄8 | 650 x 35B | ||
| 650 Standard | |||
| 40-584 | 27.5 x 1.50 | 650B | |
| 26 x 1 5⁄8 x 1 1⁄2 | 650 x 38B | ||
| 44-584 | 27.5 x 1.65 | 650B | |
| 26 x 1 5⁄8 x 1 2⁄2 | 650 x 42B | ||
| 650BSemi-Confort | |||
| 650B ½ Ballon | |||
| 47-584 | 27.5 x 1.75 | 650B | |
| 50-584 | 27.5 x 2.00 | 650B | |
| 54-584 | 27.5 x 2.10 | 650B | |
| 26 x 1 ½ x 2 | |||
| 57-584 | 27.5 x 2.25 | 650B | |
| 60-584 | 27.5 x 2.35 | 650B | |
| 62-584 | 27.5 x 2.40 | 650B | |
| 64-584 | 27.5 x 2.50 | 650B | |
| 65-584 | 27.5 x 2.60 | 650B | |
| 70-584 | 27.5 x 2.75 | 650B | |
| 74-584 | 27.5 x 2.90 | 650B | |
| 75-584 | 27.5 x 3.00 | 650B |
| Tire width in mm | Wheel rim in mm | ||||||||
| 13C | 15C | 17C | 19C | 21C | 23C | 25C | 27C | 29C | |
| 18 | X | ||||||||
| 20 | X | ||||||||
| 23 | X | X | |||||||
| 25 | X | X | X | ||||||
| 28 | X | X | X | ||||||
| 32 | X | X | X | ||||||
| 35 | X | X | X | ||||||
| 37 | X | X | X | X | |||||
| 40 | X | X | X | X | |||||
| 42 | X | X | X | X | X | ||||
| 44 | X | X | X | X | X | ||||
| 47 | X | X | X | X | X | X | |||
| 50 | X | X | X | X | X | X | |||
| 52 | X | X | X | X | X | X | X | ||
| 54 | X | X | X | X | X | X | |||
| 57 | X | X | X | X | X | X | |||
| 60 | X | X | X | X | X | X | |||
| 62 | X | X | X | X | X | X |
Variant Maxxis Minion DHF 27.5x2.60" EXO+ 3C MaxxTerra plášť, TR, kevlar
dobrý deň, v popise je uvedené WT ale v názve chýba. Viete potvrdiť že je to WT? Ďakujem
Dobry den,
nazov je spravny, vdaka za upozornenie, rozmer 27.5x2.60" vyrobca vo WT prevedeni neponuka, jedine sirky 2.50" su WTckove.
ďakujem za rýchlu reakciu,
Ešte jedna otázka mám pluskový ráfik Race Face AEFFECT PLUS, 584-40 nebude problém s touto 2.6?
Prípadne je možné tam dať niečo menšie ako mám teraz -ako 2.8? Chcel by som tam dať 2.5-2.6,
Schwalbe má takú peknú tabuľku podľa ktorej by nemal byť plášť užší ako 65-66mm, ale neviem čo Maxxis...
2.5 vo verzii WT alebo 2.6 bez WT alebo ani jeden z týchto?
Dobry den,
na 40 mm rafik nebude problem ani 2.5WT, ani tento 2.6" klasika - jedna sa stale o pomerne siroke plaste, aj na 40mm rafiku bude ich tvar po nasadeni stale v poriadku. Tak ako pisete, do sirok pod 62-63 mm uz ale neodporucame ist.
Variant Maxxis Minion DHF 27.5x2.60" EXO+ 3C MaxxTerra plášť, TR, kevlar
Zdravím. Môžem ho nahodiť na ráfik šírky 27mm?
All the answers to questions about delivery, payment, security, returns, warranty and much else.
































































Variant Maxxis Minion DHF 27.5x2.60" EXO+ 3C MaxxTerra plášť, TR, kevlar
Jazdim tubeless na rafiku o sirke 30mm, Male Karpaty, predne koleso fukam na 15-18PSI, zadne do 20PSI a je to parada, ako to drzi trakciu. Nepreklzne na korenoch/kamenoch. Max spokojnost.
Translate by GoogleShow the originalVariant Maxxis Minion DHF 27.5x2.60" EXO+ 3C MaxxTerra plášť, TR, kevlar
Zatiaľ najlepšie plášte na akých som jazdil. Samozrejme záleží ako a kde jazdíte. Ja jazdím kombo, lesné cesty, ľahký trail, sem tam zjazd, ale ani na asfalte to ide pomerne v pohode.
Translate by GoogleShow the originalVariant Maxxis Minion DHF 27.5x2.60" EXO+ 3C MaxxTerra plášť, TR, kevlar
Klasika,nesklame
Translate by GoogleShow the originalVariant Maxxis Minion DHF 27.5x2.60" EXO+ 3C MaxxTerra plášť, TR, kevlar
vyborny grip
Translate by GoogleShow the originalVariant Maxxis Minion DHF 27.5x2.60" EXO+ 3C MaxxTerra plášť, TR, kevlar
Super.
Translate by GoogleShow the originalVariant Maxxis Minion DHF 27.5x2.60" EXO+ 3C MaxxTerra plášť, TR, kevlar
Super
Translate by GoogleShow the originalVariant Maxxis Minion DHF 27.5x2.60" EXO+ 3C MaxxTerra plášť, TR, kevlar
Variant Maxxis Minion DHF 27.5x2.60" EXO+ 3C MaxxTerra plášť, TR, kevlar