microSHIFT MARVO FD-M462B front derailleur, 2x9, Dual-Pull
microSHIFT MARVO FD-M462B front derailleur
The FD-M462B 2x9 front derailleur uses Dual-Pull technology. Modified adjustment screws allow easy access for flawless adjustment of its operation. Dual-Pull technology allows universal cable pull from both the top and the bottom.|
Universal adapter allows use with diameters 34.9, 31.8 mm
|
|
Compatible with Shimano drives
|
| Groupset | microSHIFT Marvo |
| Gears | 2x9 |
| Control type | mechanical |
| Max converter size | 34-42T |
| Weight | 154 g |
| Material | aluminium |
| Chain line | 48.8 mm |
| Angle | 66-69° |
| Capacity | 14T |
| product ID | 143467 |
I have a specific question. I have the guys and a set of 3x9, but what I did was remove the big saw and make it a 2x9. I have 2 options. Limit the current one's movement
derailleur to only 2 positions, or replace the derailleur with a 2-speed one with a shift lever. But I think that with 2x9 cranks, one chainring is at the level of the one I removed and the other at the level of the middle chainring. Or something completely different.
So my question is, is it possible to use this derailleur for me? I don't know if I explained it clearly.
Mam zvlastnu otazku. Mam kluky a sadu 3x9, ale urobil som to ze som velku pilu odstranil a urobil z toho 2x9. Mam 2 moznosti. Obmedzit chod terajsieho
presmykaca na iba 2 polohy, alebo vymenit presmykac za 2 rychlostny aj s radiacou packou. Myslim si ale ze pri klukach 2x9 je jeden prevodnik na urovni toho ktory som odstranil a druhy na urovni stredneho prevodnika. Alebo este uplne inde.
Moja otazka preto znie, ci je mozne tento presmykac pouzit pre mna. Neviem ci som to vysvetlil zrozumitelne.
Dobry den,
tazko povedat - dolezita bude retazova linka, kazdopadne presmykac by malo byt mozne odladit pre akykolvek standardny 2x setup, treba sa len pohrat s dorazmi a napnutim lanka.
Good day. For the advent 2x9 set, is this derailleur compatible with advent -left 2speed?
Zial m492 is not available
Dobry den. K sade advent 2x9 je tento presmykovac kompatibilny s radenim advent -left 2speed?
Zial m492 nie je k dispozicii
Dobrý deň,
výrobca microSHIFT uvádza radenie ADVENT ako kompatibilné len s príslušným ADVENT prešmykom.
Tento MARVO prešmyk je však kompatibilný s akýmkoľvek MTB radením od Shimana, napr.: https://www.mtbiker.sk/shop/komponenty/radenie/mtb-7-8-9-prevodov/shimano-radenie-deore-m5100-lave-2-k-na-objimku-bez-ukazovatela.html.
To sme na tom istom. Aj pri M492 ktore uvadzaju v katalogu sice pisu ze kompatibilne len s Advent avsak pri popise m492 sa pise ze shimano kompatibilne. Za danej situacie radsej nebudem preferovat toto riesenie
Hello, is it possible to order such a slide for 2x9 sp also for attachment to navarok? or would it be best from shimano?
Zdravim Vas ,je možne objednať takyto prešmykaš pre 2x9 sp aj na uchytenie na navarok? alebo najlepšie by bolo aj od shimana?
Show translationAutomatically translated
Dobrý deň,
žiaľ aktuálne nie, všetky 2x9 prešmyky dostupné u našich dodávateľov disponujú len montážou na objímku.
Üdv. Az lenne a kérdésem hogy felső vagy alsó bilincses a felfogatás? Felsőbilincses 2x9-est keresek.
Üdvözlöm
a termék felső bilincses (High Clamp) kivitelű.
Hello, I want to ask if it would fit on 2x11 since the tooth size is 24.32
Dobrý deň chcem sa spýtať že či by pasoval na 2x11 z veľkosť zubov je 24,32
Show translationAutomatically translated
Dobry den,
skor nie - klietka je dimenzovana na 9-rychlostne retaze, je teda o nieco sirsia, vyladenie presmykaca na spravny chod moze byt problematicke.
All the answers to questions about delivery, payment, security, returns, warranty and much else.
































































