BBB BBS-101 brake filling and bleeding kit
- Bleed kit for hydraulic disc brakes.
- Designed for: Avid, Shimano, Magura, Hayes and Sram.
- Suitable for mineral oil and DOT brake fluid.
- Contents: 3 syringes, bottle, hoses, adapters and closing clips.
| product ID | 38292 |
Dobrý deň dokážem odvzdusnit s touto sadou brzdy sram guide r model pred 2017 ?
Ďakujem
Dobry den,
ano, sada sedi na starsie SRAM brzdy bez bleeding edge portu.
Dobry den.Je mozne týmto odvzdusnovacim setom odvzdusnit aj sedlovky Rockshox?dakujem.
Dobrý deň,
Táto sada je určená iba na brzdy. Na sedlovky RockShox máme túto https://www.mtbiker.sk/shop/vidlice-a-tlmice/prislusenstvo/rock-shox-reverb-hydraulic-bleed-kit.html
Zdravim. Chcel by som sa informovat ci je tato sada vhodna aj na brzdy KLS Helix 7
Dobrý deň,
Mala by sedieť aj na Vaše brzdy
Prosím má táto sada aj bleeding edge pre nové brzdy sram? Ďakujem za info
Najrýchlejšia odpoveď v dejinách ale bude záporná, čiže nie. Mám to doma a len na staršie modely.
dobrý deň, je tento kit kompatibilný aj s brzdami formula RX ? ďakujem.
Dobrý deň,
Sada je určená len pre brzdy Avid, Shimano, Magura, Hayes a Sram
Dobrý deň je táto sada vhodná aj pre tectro draco?
Dobry den,
zial brzdy Tektro v zozname kompatibilnych modelov pre tuto sadu nie su.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

































































Výborná sada
Translate by GoogleShow the originalA bit tricky. Syringe on the tube on the lever but vented the slx to 100%
Trocha ošemetné. Striekačka na hadičke na páčke no odvzdušnilo slx na 100%
Show translationAutomatically translatedOnce again, the old adage that it is not worth saving has proven true for me, and in this case it is doubly true. I bought this kit just to add some power to the old sram level brakes. At the very beginning, a table rushes at you with a considerable surprise that although the manufacturer lists all SRAM brakes in the description, only the code is listed on the package. I think the thread is the same, the length too, so it can't be a problem. However, the problem arose when I started to vent the liquid, so the clip was letting air out. When I finally managed to do it anyway, the hoses decided that they wouldn't seal when screwed in, even tightening them with an open-end wrench didn't help. After adding one o-ring for sealing, it worked like that, another problem occurred when pushing the liquid from the bottom up, because it all flowed out through the thread in the upper syringe. I don't know how the other brake brands are doing, but I feel like throwing €20 in the basket and buying something decent and high-quality, because it's really not worth saving on this one.
Opäť sa mi osvedčilo staré známe že šetriť sa neoplatí a v tomto prípade to platí dvojnásobne. Kúpil som si túto sadu len preto aby som na starých sram level brzdách pridal trochu sily. Už na začiatok sa na vás vyrúti tabuľka s nemalým prekvapením že hoci výrobca uvádza v popise všetky sram brzdy na obale sú uvedené iba code. Vravím si veď závit ten istý, dĺžka tiež takže to nemôže byť problém. Problém však nastal keď som začal odvzdušňovať kvapalinu tak klipsňa prepúšťala vzduch. Keď sa mi to nakoniec ako tak podarilo čo to spraviť tak sa hadice pri naskrutkovaní rozhodli že nejdú tesniť, nepomohlo ani pritiahnutie vidlicovým kľúčom. Po pridaní jedného o-ringu na utesnenie to šlo ako tak, ďalší problém nastal pri tlačení kvapaliny zdola nahor, všetko totižto vytekalo cez závit v hornej striekačke. Neviem ako sú na tom ostatné značky bŕzd ale ja mám chuť hodiť 20€ do koša a kúpiť si niečo poriadne a kvalitné, pretože na tomto sa šetriť naozaj neoplatí.
Show translationAutomatically translatedOn the magura, there is still one end on the pawl missing
Na maguru chyba este jedna koncovka na packu
Show translationAutomatically translated