Park Tool PROFESSIONAL PT-TS-2-3 wheel truing stand
Park Tool PROFESSIONAL PT-TS-2-3 wheel truing stand
Original Park Tool wheel truing stand with more than 40 years of production, upgraded previous model TS-2-2-P.The changes are:
- the possibility of attaching larger wheels, up to 29+ (previously "only" 29")
- the possibility of attaching longer hubs, up to 200 mm (previously "only" 175 mm)
- the possibility of centering rims with a width of up to 102 mm/ 4", i.e. no change :-)
- increased space for both disc and casing
- ergonomic and faster control of tilting the vertical arms
- the possibility of clamping the hubs of all designs (quick-clamp version, solid axle, thru-axle) without the need to purchase additional accessories (adapters for clamping thru-axle hubs are included and practically stored in the arms)
Each stand is inspected and calibrated before shipping (you can tell by a small sticker with the date of calibration).
|
Like other models of Park Tool wheel truing stands, it can be equipped with devices for measuring the unevenness of the disc and the rim (DT-3, DT-3i-2, TS-2-Di)
|
|
The stand can be clamped in a tilting base with compartments (for additional purchase) or screwed to a board (two holes with a diameter of 9.5 mm, 200 mm apart) or clamped in a vise (the width of the basic beam is 76 mm)
|
|
Surface treatment with powder varnish/komaxit
|
| product ID | 186408 |
•
Variant Park Tool PROFESSIONAL PT-TS-2-3 centrovacia vidlica
Dobry den,
rad by som sa spytal, nakolko v popise je napisane ze uz netreba nic dokupovat ani rychloupinak. Lenze rychloupinak som tam nenasiel, v baleni su len 2 take skrutky-adaptery v tvare kuzela co som nakrutil uplne hore na oboch stranach, takze ak tomu spravne rozumiem vlozim medzi ne koleso ci uz 12, 15 alebo aj 20 mm s pevnou osou, dotiahnem a finito. Ale ako to funguje potom s rychloupinakom ked v baleni nebol, lebo s tymi adaptermi to predsa asi nemoze fungovat, jedine ze tie adaptery dam prec a vlozim tam koleso s rychloupinakom.
Tiez sa chcem este spytat ci je to nakalibrovane spravne alebo si to musim este ja nejako upravit? Lebo skusal som dat uplne nove koleso (ani to koleso nie je uplne vycentrovane z vyroby) ale tie 2 klepeta mi nesli uplne do stredu ze by tam bola rovnaka medzera z oboch stran kolies a tiez sa mi zdaju ze ten mechanizmus nefunguje ako ma. Cakal som ze to na 100 % bude ukazovat.
Dakujem za vysvetlenie.
•
Dobry den,
centrovacia stolica by mala byt z vyroby fabricky spravne nakalibrovana - samozrejme casom (pouzivanim) je vzdy dobre kalibraciu overit, Park Tool ma k dispozicii vyborne navody.
- kalibracia: https://www.youtube.com/watch?v=OhSZKGJliwA
- skrateny navod (+ popis psominanych adapterov): https://www.parktool.com/assets/doc/product/TS-2.3_instructions.pdf
- kompletny popis priebehu centrovania (vseobecne rady, na co davat pozor, ako riesit napnutie spic atd.): https://www.parktool.com/en-int/blog/repair-help/wheel-and-rim-truing
•
Variant Park Tool TS-2-2-P Professional centrovacia vidlica, modrá
You have a mistake in the description, it is an economic version of the PT-TS-4-2. The difference is that this one has a blue powder coating, while the PT-TS-4-2 is chrome plated
V popise máte chybu, je to ekonomická verzia k PT-TS-4-2. Rozdiel je v tom, že táto má modré práškovanie, zatiaľ čo PT-TS-4-2 je pochrómovaná
Show translationAutomatically translated
•
samozrejme, je to ekonomická verzia k PT-TS-2-2
•
Variant Park Tool PROFESSIONAL PT-TS-2-3 centrovacia vidlica
Dobrý deň , poprosím vás je k tejto centrovacej vidlici aj adaptér na pevnú os , alebo ho musím dokúpiť zvlášť.
Ďakujem.
•
Dobry den,
adaptery na uchytenie kolies s pevnou osou su sucastou balenia.
All the answers to questions about delivery, payment, security, returns, warranty and much else.
-9% Park Tool PT-TS-2-Di set of deviation gauges for centering fork
199 €
-9%
RRP 219 €
-8% Park Tool SuperGrip PT-SAC-2 anti-seize compound, 113 g
11.99 €
-8%
RRP 14.99 €
We are the largest cycling e-shop in Slovakia, verified by 100,000+ customers.
We are available via e-mail, online chat, phone or in person at our MTBIKER stores.
Thanks to your order we can support cycling development.
The payment process is safe and we offer you a wide range of options.
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
arrow_outward
Variant Park Tool TS-2-2-P Professional centrovacia vidlica, modrá
The main difference compared to cheaper hobby models is the robustness of the construction. It is "honest iron", which is also reflected in the weight, no profiled aluminum in combination with plastic...the stability of the wheel in the stand is significantly better (more resistant to unwanted shifts due to mechanical interference). ..... of course rich accessories and unprecedented service support. It is an investment for years without loss of quality. ....I had a MINOURA hobby stand before.
Hlavný rozdiel oproti lacnejším hobby modelom je v robustnosti konštrukcie. Ide o "poctivé železo", čo sa odzrkadľuje aj na váhe, Žiaden profilovaný hliník v kombinácii s plastom....stabilita kolesa v stojane je tým výrazne lepšia (odolnejšia voči nechceným posunom mechanickým zavadením). ..... samozrejme bohaté príslušenstvo a bezprecedentná servisná podpora. Je to investícia na roky bez straty kvality. ....mal som predtým hobby stojan MINOURA.
Show translationAutomatically translatedVariant Park Tool PROFESSIONAL PT-TS-2-3 centrovacia vidlica
A brutal price, but a joy to center. Quite stable in the TSB-2-2 stand, fun with the TS-2-Di deviation meters.
Brutálna cena, ale radosť centrovať. V stojane TSB-2-2 dosť stabilné, s úchylkomermi TS-2-Di zábavné.
Show translationAutomatically translatedVariant Park Tool TS-2-2-P Professional centrovacia vidlica, modrá
Uzas,kvalita...ale nebol cas to vyskusat,proste nestiham,ziadna cina,teda dufam,ze poctivy kov.
Translate by GoogleShow the originalVariant Park Tool PROFESSIONAL PT-TS-2-3 centrovacia vidlica
Klasika od PT bez toho sa nedá robiť kvalitne centrovanie kolies . Dokúpim ešte ďalšie veci
Translate by GoogleShow the originalVariant Park Tool TS-2-2-P Professional centrovacia vidlica, modrá
Centering stool for perfect detail. The joy of centering, simply Park tool is quality
Centrovacia stolica pre perfektný detail. Radosť centrovať , proste Park tool je kvalita
Show translationAutomatically translatedVariant Park Tool TS-2-2-P Professional centrovacia vidlica, modrá
Super, tesim sa ako maly chlapec. Rychlo vycentrujete. Spokojnost. Odporucam
Translate by GoogleShow the originalVariant Park Tool TS-2-2-P Professional centrovacia vidlica, modrá
So far only tested on one wheel, but it seems quite good.
Tatiaľ odskúšané len na jednom kolese ale javí sa dosť dobre.
Show translationAutomatically translatedVariant Park Tool TS-2-2-P Professional centrovacia vidlica, modrá
she is perfect to work with, nothing to complain about... just PT
perfektne sa s ňou pracuje, nie je čo vytknúť... proste PT
Show translationAutomatically translatedVariant Park Tool PROFESSIONAL PT-TS-2-3 centrovacia vidlica
kvalitne prevedenie ale ta cena dost zaboli v penazenke.
Translate by GoogleShow the originalVariant Park Tool PROFESSIONAL PT-TS-2-3 centrovacia vidlica
nemá chybu
Translate by GoogleShow the originalVariant Park Tool TS-2-2-P Professional centrovacia vidlica, modrá
Comfortable.
Pohodlná.
Show translationAutomatically translatedVariant Park Tool TS-2-2-P Professional centrovacia vidlica, modrá
functional and reliable, serves well
funkcne a spolahlive, posluzi fajn
Show translationAutomatically translatedVariant Park Tool PROFESSIONAL PT-TS-2-3 centrovacia vidlica
He shows it to Dish (the exact center) as he pleases.
I calibrated it with a front wheel from a proper wheel builder (hub 110mm rim 35mm outside)
when I inserted the rear wheel (142mm, 29mm) perfectly dished, it showed that the wheel is not exactly in the middle.
The first time park tool let me down.
Ukazuje si to Dish (presný stred) ako sa mu zachce.
Show translationAutomatically translatedVykalibroval som ju s predným kolesom od poriadneho wheel buildera (náboj 110mm ráfik zvonku 35mm)
keď som vložil zadné koleso(142mm, 29mm) perfektne vydishované ukazovalo to že koleso nie je presne v strede.
Prvý krát čo ma park tool sklamal.
Variant Park Tool PROFESSIONAL PT-TS-2-3 centrovacia vidlica
Variant Park Tool PROFESSIONAL PT-TS-2-3 centrovacia vidlica