Shimano PD-RS500 pedals
Shimano PD-RS500 pedals
Road pedals PD-RS500 in SPD SL design.|
Wide base of the pedal body for better transmission of pedaling power
|
|
Extended bearings for greater rigidity and power transmission
|
|
Cartridge pedal axle with easy maintenance
|
|
Easy step in, easy step out, the force can be adjusted
|
|
Including SM-SH11 cleats , 6° flow
|
| Colour | black |
| Weight | 320 g - pair (498 g - total package weight including cleats) |
| Material | pedal body (aluminum), axle (chrome+steel) |
| Package contents | pedals, cleats SM-SH11, screws |
| product ID | 90676 |
WARNING
For assistance with installation, adjustment and replacement of the products which are not found in the user's manual, please contact the place of purchase or a distributor. A dealer's manual for professional and experienced bicycle mechanics is available on our website (https://si.shimano.com).
For safety, be sure to carefully read this "user's manual" before use, follow it for correct use, and save it so that you can refer back to it at any time.
The following instructions should always be followed in order to prevent personal injury, damage to equipment or damage to the surroundings. The instructions are classified according to the degree of danger or damage which may occur if the product is used incorrectly.
DANGER – Failure to follow the instructions will result in death or serious injury.
WARNING – Failure to follow the instructions could result in death or serious injury.
CAUTION – Failure to follow the instructions could cause personal injury, or physical damage to equipment and surroundings.
WARNING
- Do not disassemble or modify the product. It may cause the product to not operate correctly, and you may fall unexpectedly and be seriously injured.
- Before attempting to ride with these pedals and cleats (shoes), be sure you understand the operation of the engagement/release mechanism for the pedals and cleats (shoes). SPD-SL pedals are designed to release only when needed. They are not designed to release automatically in a fall from your bicycle.
- Only use SPD-SL shoes together with this product. Other types of shoes may not release from the pedals, or may release unexpectedly.
- Use only SHIMANO cleats and securely tighten the mounting bolts to the shoes. If the bolts are not securely tightened, your foot may not be able to release from the pedals, resulting in a fall.
- Before you attempt to ride with these pedals and cleats, apply the brakes, then place one foot on the ground and practice engaging and releasing each cleat from the pedal until you can do so instinctively and with minimal effort.
- Practice riding on a level surface first until you become adept at engaging and releasing the cleats from the pedals.
- Before riding, adjust the cleat retention force on the pedals to your preference. If the cleat retention force on the pedals is weak, the cleats may release accidentally, you may lose your balance, and you may fall off the bicycle. If the cleat retention force on the pedals is strong, the cleats may not release easily.
- At low speeds or when there is a possibility that you might need to stop (for example, when making a U-turn, at an intersection, when riding uphill or when cornering sharply), release the cleats from the pedals beforehand so that you can quickly put your feet on the ground at any time.
- When riding in adverse conditions, use a lighter cleat retention force to secure the pedal cleats.
- To ensure proper engagement and release, keep the cleats and binding free of dirt and debris.
- Be sure to periodically inspect the cleats for wear. When the cleats are worn, replace the cleats and adjust the cleat retention force of the pedals before riding and after replacing the cleats. If the above warnings are not heeded, the shoes may not disengage from the pedals when you want them to, or they may disengage unexpectedly or accidentally, which could result in a serious injury.
- Reflectors must be installed on the bicycle whenever riding on public roadways. Reflectors are sold separately for models that do not come standard with reflectors. Consult your place of purchase or a distributor for information on compatible reflectors.
-If the reflectors are dirty or damaged, it will be difficult for oncoming vehicles to spot you. Replace the reflectors if they are dirty or damaged.
All the answers to questions about delivery, payment, security, returns, warranty and much else.
