Muc-Off Ultimate Tubeless Setup Kit-DH/Plus
The Muc-Off Ultimate Tubeless Kit contains everything you need to build two tubeless-ready, ready-to-mount wheels.
Each kit includes: Muc-Off Tubeless Rim Tape, Seal Patches, 2x black CNC machined tubeless valves and 2 bags of Muc-Off No Puncture Tubeless Sealant.
Instructions for use:
1. Remove any old strip or tape and clean it.
2. Make sure the edge is clean and dry before applying the tape.
3. Take the tape from the packet and align it from the opposite side of the valve.
4. Start by unrolling a small amount of tape and press down with your thumb or finger to hold it down.
5. Continue to hold while you pull the tape off and stick firmly, once you have a few cm on the tape, the tape will stick and holding is no longer necessary.
6. Continue all the way around the edge (if it has a large concave layer, you can pull and roll the tape to fill all the edges)
7. Overlap the tape by approximately 10-15 cm
8. Leave a small amount unglued so you can cut off the rest
9. After cutting out the sketch and pulling the tape down, create a seal
10. Run your thumb around the edge and make sure there are no air pockets or dirty spots.
11. Once you're happy with how it looks, use a small pin to find the hole for the valve and cleanly pierce the tape ready for the valve
12. Grab your tubeless valve and remove the retaining ring and the ring
13. Choose the correct rubber joint for the rim tape and insert the valve into the rim
14. Install the O-ring and snap ring to secure the valve lock (do not overtighten, as this may damage the rubber)
15. Remount the tire of your choice so as not to damage the tape (using tire levers etc.)
16. Inflate the tire to shape (you should hear a popping sound around the rim)
17. Release the air and remove the valve core using the spare valve cap
18. Grab the bag of putty and shake it
19. Unscrew the cap and put the valve on the valve in the right position
20. While holding the bag, rotate the wheel down so that the bag is now upside down
21. Insert the sealant by rolling the bag down
22.Turn the wheel back to the right and remove the bag
23. Reinsert the valve core and inflate it to your pressure
Product details
product ID | 205691 |
Rating 0/5
Similar products
You can try these searches
You may find these products complementary
Why shop with us?
Find out what makes us specialWhy shop with us?
More about shopping900 000+ orders
We are the largest cycling e-shop in Slovakia proven by 100,000+ customers.
Unique customer service
We are available via email, online chat, phone or in person at our MTBIKER stores.
We actively support the cycling community in Slovakia
Thanks to your order we can support cycling development.
Secure payment methods
The payment process is safe and we offer you a wide range of options.
Loyalty system
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
MTBIKER centre and showroom
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
comment Reviews
There are currently no reviews