Fenix ​​TK11 TAC tactical LED flashlight

The Fenix ​​TK11 TAC is a tactical light with easy operation with the possibility of quick activation of the stroboscope and a power of up to 1600 lumens (ANSI). It is equipped with a top LED Luminus SST40, thanks to which it shines up to a distance of 335 meters. The lamp is equipped with a rotary control, which can be used to lock the control or choose one of the two modes of use. In tactical mode, the flashlight can be turned on to the highest mode or to a stroboscope. In service mode, it is possible to choose between four lighting modes. The lamp can be powered by two disposable CR123A batteries or one high-capacity Li-ion 18650 battery (not included in the package). The solid and waterproof design predestines this tactical light primarily for harsh outdoor conditions and for use in security forces, in search, rescue operations and also for hunters.

The Fenix ​​TK11 TAC flashlight replaces the older Fenix ​​TK15 and Fenix ​​TK15 Ultimate Edition models.

All parameters of the lamp (light output, battery operation time, waterproofing, afterglow and impact resistance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Fenix ​​TK11 TAC lamp parameters

• A powerful Luminus SST40 LED with a lifespan of 50,000 hours is used.
• Two lighting modes:
  • Tactical mode: 1600 lumens (2 hours) -> stroboscope 1600 lumens.
  • Duty mode: 1600 lumens (2 hours) -> 500 lumens (4.5 hours) -> 50 lumens (47.5 hours) -> strobe 1600 lumens.
• The endurance times are measured with a rechargeable Li-ion battery type 18650 with a capacity of 3500 mAh (not included in the package).
• Highly efficient smooth reflector for a light cone with an afterglow of up to 335 meters (27893 cd).
• Intelligent protection against overheating, low battery warning.
• Two 3V CR123A lithium batteries or one rechargeable high-capacity Li-ion 18650 battery can be used for power supply.
• Dimensions 14 cm (length) x 3.4 cm (head diameter) x 2.35 cm (body diameter).
• Weight 114 grams (without batteries).
• Solid construction of the body made of aircraft hardened aluminum.
• Durable hard-to-scratch surface - Type III hard anodized.
• Impact-resistant from a fall from a height of 1 meter.
• Waterproof and dustproof according to the IP68 standard (tested under water at a depth of 2 meters for 30 minutes).
• Hardened ultra clear glass lens with anti-reflective coating.
• Tactical switch at the end of the light (instant on/off function by holding).
• Trapezoidal threads highly resistant to wear.
• A wrist lanyard, a spare o-ring and a belt pouch are included with the lamp.
• Batteries are not included in the package.
• Optional accessories can be purchased: AER-02 cable switch, AOF-M red filter, AOD-M white diffuser, AOT-M traffic cone or ALP-MT case.
• The following accessories are also compatible with the light: ALC-01 swivel holster, ALP-10L holster, bike mount, Fenix ​​bike mount, ALG-00 and ALG-01 gun rail mounts, metal magnetic barrel mount, plastic magnetic mount, installation of the lamp on optics.

The use

The rotary control at the end of the lamp can be used to choose between lighting modes that have different controls.

Tactical mode (rotary control in the left position): To turn on, press the tactical button at the end of the light, for immediate activation, gently hold the button. The lamp is always activated in the highest mode. To activate the strobe, hold down the button for 0.8 seconds (even from the off state). By gently pressing the button, the lamp returns to its original mode. Press the button to turn off the lamp.

Service mode (rotary control in the right position): To turn on, press the tactical button at the end of the lamp, for immediate activation, gently hold the button. The lamp remembers the last selected mode (except stroboscope). Lighting modes (except stroboscope) can be changed cyclically by pressing the button. To activate the strobe, hold the button for 0.8 seconds (even from the off state). By gently pressing the button, the lamp returns to its original mode. Press the button to turn off the lamp.

In the middle position of the rotary controller, it is possible to lock the control button. If the lamp is switched off, it cannot be switched on. If it is on, the control will be locked in the currently set lighting mode and the control button will not respond. To reactivate the tactical button, it is necessary to turn the controller to tactical or service mode. When using the cable switch, only the highest constant light mode is available.

Intelligent protection against overheating: If the temperature of the lamp exceeds 60°C, then it will automatically reduce the output in successive steps until the temperature drops below the safe limit. After cooling below 60°C, full power can be used again.

Warning of depleted batteries - the lamp will gradually automatically switch to the lowest power and flash 3 times every five minutes.

Warning

• Use only high-quality 3V CR123A batteries or protected 3.7V Li-ion 18650 batteries to avoid damage to the lamp, for example due to leakage of substances from the battery.
• Insert the batteries with the positive pole towards the lamp head.
• If the protective rubber rings appear damaged after a long period of use, replace them. The rings must also be lubricated to prevent rubber erosion. By following these rules, the lamp will be properly protected against water.
• If the light flickers, does not switch to higher power modes, or does not light up, it may be for one of the following reasons:
  • Batteries are almost empty - replace them.
  • The contacts inside the lamp are dirty - clean them with a cotton swab dipped in alcohol.
  • The rear part of the lamp is loose - tighten it.

Warranty

Five-year warranty.

Aftersight: 335m
Max endurance: 47.5 hours
Output: 1600lm
Number of modes: 4
Weight: 114g
Power supply: 2x CR123A
Power supply: 1x 18650
Light source: Luminus SST-40
Waterproof: IP68 (immersion 2 m)