Mondraker Chaser 29 e-bike, cherry red/black
Mondraker Chaser 29 electric bike
Level and quality of equipmenthelp
Serious sports equipment for intense and regular off-road driving, where you can 100% rely on sufficient performance and component installation.
Specification
Drive |
Bosch Performance Line CX Cruise (25 Km/h) GEN4 BS3
|
Battery |
Bosch Powertube 750 Wh, Bosch Kiox 300
|
Frame |
Chaser 6061 Alloy Stealth Evo, e-Bike Optimized Zero Suspension System, 150 mm travel, Forward Geometry, internal removable battery, Boost 12x148 mm rear axle, tapered head tube, one-piece Monoblock upper link, HHG internal cable routing, MAX capacity sealed bearings, oversize 17 mm axles, integrated dropout speed sensor, exclusive plastic motor covers, shock mudguard
|
Fork |
Fox 36 29 Float FIT GRIP EVOL Rythm, 160 mm, e-bike tuned, tapered steerer tube, Boost 15x110 mm axle, 44 mm offset. Settings: sweep adjust compression, Low-speed rebound, air preload
|
Rear shock |
RockShox Deluxe Select R Debonair, 205x65 mm. Settings: Low-speed rebound, air preload. Trunnion top mount, 25x10 mm bottom bushings
|
Shifting |
Sram Trigger SX Eagle, 12s, X-Actuation 1:1, single click
|
Derailleur |
Sram SX Eagle, Type 3 roller bearing clutch, cage lock, long cage, 1x12s, X-actuation 1:1
|
Cassette |
SRAM PG-1210, 11-50T, 12s
|
Chain |
SRAM SX Eagle, 12s, Powerlock
|
Cranks |
Race Face Aeffect ebike, 165 mm
|
Chainring |
Sram X-Sync 2 Eagle 34T, steel, narrow-wide, 104 BCD
|
Front brake |
Sram G2 R, 4-piston caliper, Centerline 200 mm IS 6 bolts one-piece rotor, steel-backed organic pads
|
Rear brake |
Sram G2 R, 4-piston caliper, Centerline 200 mm IS 6 bolts one-piece rotor, steel-backed organic pads
|
Brake levers |
Sram G2 R, tool-free reach adjust
|
Rims |
MDK-HP1 29, 30 mm internal width, tubeless ready, 32 spokes
|
Front hub |
Formula DC711, Boost 15x110 mm, sealed bearings, IS 6 bolts
|
Rear hub |
Formula EHL148 Boost 12x148 mm, sealed bearings, IS 6 bolts
|
Spokes |
CN round stainless steel
|
Tires |
Maxxis Rekon 29x2.6, tubeless ready, dual compound, EXO protection, 60TPI, folding bead, Maxxis Rekon 29x2.6, tubeless ready, dual compound, EXO protection, 60TPI, folding bead
|
Seatpost |
Onoff Pija dropper internal, diameter 31.6 mm, S size: 387x125 mm, M size: 425x150 mm, L/XL size: 465x170 mm
|
Saddle |
FIZIK Terra Aidon X5 145 mm
|
Stem |
Onoff Sulfur FG 30 mm 0º, 6061 forged alloy, 31.8 mm barbore
|
Handlebars |
Onoff Sulfur 1.0 double butted 6061 alloy, rise: 20 mm, width: 800 mm, 9º backsweep, 5º upsweep, 31.8 mm barbore
|
Grips |
Onoff Diamond, 1 lock-on, 135 mm
|
Headset |
Onoff Saturn tapered for 1-1/8” to 1-1/2” head tube, ACB sealed bearings, top 41x30.2x7x45ºx45º, bottom 51.9x40x8x45ºx45º
|
Rear shock settings |
Light compression, Light rebound, 1 Token
|
Derailleur hanger |
Mondraker M068
|
Product details
Sex | Men, Unisex |
Battery | 756 Wh |
Drive | Bosch Performance Cruise |
Model year | 2022 |
Groupset | SRAM SX |
Gears | 1x12 |
Brakes | Disc brakes - hydraulic |
Wheel diameter | 29" |
Fork travel | 160 mm |
Material | aluminium |
Colour | cherry red/black |
Fork | Air |
Shock | Air |
Rear travel | 150 mm |
Weight | 24.8 kg |
product ID | 181646 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
Rating 0/5
Similar products
You can try these searches
You may find these products complementary
Why shop with us?
Find out what makes us specialWhy shop with us?
More about shopping900 000+ orders
We are the largest cycling e-shop in Slovakia proven by 100,000+ customers.
Unique customer service
We are available via email, online chat, phone or in person at our MTBIKER stores.
We actively support the cycling community in Slovakia
Thanks to your order we can support cycling development.
Secure payment methods
The payment process is safe and we offer you a wide range of options.
Loyalty system
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
MTBIKER centre and showroom
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
comment Reviews
There are currently no reviews