Mondraker Crafty R 29 electric bike, green
Mondraker Crafty R 29 electric bike
Level and quality of equipmenthelp
Serious sports equipment for intense and regular off-road driving, where you can 100% rely on sufficient performance and component installation.
Specification
Frame |
Crafty 6061 Alloy Stealth Evo, e-Bike Optimized Zero Suspension System, 150mm travel, Forward Geometry, internal non-removable battery, Boost 12x148mm rear axle, tapered head tube, one-piece Monoblock upper link, HHG internal cable routing, MAX capacity sealed bearings, oversize 17mm axles, integrated dropout speed sensor, exclusive plastic motor covers.
|
Fork |
Fox 38 29 Float FIT GRIP EVOL Performance, 160mm, e-bike tuned, tapered steerer tube, Boost 15x110mm axle, 44mm offset. Settings: 3 positions with micro-adjust compression, low-speed rebound, air preload
|
Rear shock |
Fox Float-X LV Performance, 205x65mm.
Settings: compression 2 positions lever, low-speed rebound, air preload. Trunnion top mount, 25x10mm bottom bushings |
Headset |
Onoff Saturn tapered for 1-1/8” to 1-1/2” head tube, ACB sealed bearings, top 41x30.2x7x45ºx45º, bottom 51.9x40x8x45ºx45º
|
Rear derailleur |
Sram GX Eagle, Type 3 roller bearing clutch, cage lock, 1x12s, X-Actuation 1:1
|
Shifters |
Sram Trigger NX Eagle, 12s, X-Actuation 1:1, single click
|
Brake levers |
Sram DB8, tool-free reach adjust
|
Cranks |
: Race Face Aeffect ebike, 165mm
|
Handlebars |
Onoff Sulfur 1.0 double butted 6061 alloy, rise: 20 mm, width: 800 mm, 9º backsweep, 5º upsweep, 31.8 mm barbore
|
Stem |
Onoff Sulfur FG 30 mm 0º, 6061 forged alloy, 31.8 mm barbore
|
Seatpost |
Onoff Pija dropper internal, diameter 31.6mm, S size: 405x95-125mm, M size 458x120-150mm, L size: 498x140-170mm, XL size: 498x140-170mm
|
Saddle |
FIZIK Terra Aidon X5 145mm
|
Front hub |
Mavic, Boost 15x110mm, IS 6 bolts
|
Rear hub |
Mavic, Boost 12x148mm, ID360 Ratched system, IS 6 bolts
|
Chain |
Sram SX Eagle, 12s, Powerlock
|
Cassette |
Sram PG-1210, 11-50T, 12s
|
Spokes |
Mavic J-bend double butted, contactless lacing
|
Rims |
Mavic E-Deemax 29, 30mm internal width, welded, PFP, tubeless ready, 28 spokes
|
Tires |
Maxxis Minion DHF 29x2.6, tubeless ready, 3C MAXX TERRA, EXO+ Protection, 120TPI, folding bead, Maxxis Minion DHR II 29x2.6, tubeless ready, 3C MAXX TERRA, EXO+ Protection, 120TPI, folding bead
|
Engine |
Bosch Performance Line CX Cruise
|
Product details
Sex | Men, Unisex |
Battery | 750 Wh |
Drive | Bosch Performance CX |
Model year | 2023 |
Gears | 1x12 |
Brakes | Disc brakes - hydraulic |
Wheel diameter | 29" |
Travel | 160 mm |
Material | aluminium |
Colour | green |
Fork | Air |
Shock | Air |
Zdvih zadnej stavby | 150 mm |
product ID | 207875 |

All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
Rating 0/5
star_outlinestar_outlinestar_outlinestar_outlinestar_outlineYou may find these products complementary
Pedals / Clipless MTB pedals
More productsShow all products from this categoryAM/EM helmets
More productsShow all products from this categoryBike apparel and Backpacks
More productsShow all products from this categoryWhy shop with us?
Find out what makes us specialWhy shop with us?
More about shopping800 000+ orders
We are the largest cycling e-shop in Slovakia proven by 100,000+ customers.
Unique customer service
We are available via email, online chat, phone or in person at our MTBIKER stores.
We actively support the cycling community in Slovakia
Thanks to your order we can support cycling development.
Secure payment methods
The payment process is safe and we offer you a wide range of options.
Loyalty system
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
MTBIKER centre and showroom
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
comment Reviews
There aren't currently any reviews. If you have experience, add your review here.