Fenix ​​PD36 TAC tactical flashlight

The Fenix ​​PD36 TAC is a very powerful tactical light with easy operation and the ability to quickly activate the strobe. It is equipped with the latest LED LUMINUS SST-70 and provides a luminous flux of up to 3000 lumens (ANSI) and an afterglow of up to 274 meters. The package includes a rechargeable 21700 Li-ion battery with a capacity of 5000 mAh, which is charged via its own USB-C connector. The lamp is equipped with a rotary control, which can be used to lock the control or choose one of the two modes of use. In tactical mode, the light can be turned on to 2000 lumen mode or to a stroboscope. In the service mode, it is possible to choose between five lighting modes and a stroboscope. In the lowest mode , it can shine for up to 160 hours. The precise and waterproof design predetermines this tactical light primarily for demanding outdoor conditions. It will be of great use to the security forces, during search, rescue operations and for hunting.

All lamp parameters (luminous flux, battery operation time, waterproofing, afterglow and impact resistance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Parameters of the Fenix ​​PD36 TAC tactical flashlight

• A powerful Luminus SST-70 LED with a lifespan of 50,000 hours is used.
• Two lighting modes:
  
  • Tactical mode: 2000 lumens (3.1 hours) -> strobe 2000 lumens.
  • Duty mode: 3000 lumens (1.5 hours) -> 1000 lumens (3.25 hours) -> 350 lumens (10.1 hours) -> 150 lumens (18.75 hours) -> 30 lumens (43 hours) - > stroboscope (2000 lumens)
• Endurance times are measured with a rechargeable Li-ion battery type 21700 with a capacity of 5000 mAh.
• Highly efficient smooth reflector for a light cone with an afterglow of up to 274 meters (18700 cd).
• Intelligent protection against overheating.
• Low battery warning.
• Dimensions 14 cm (length) x 2.65 cm (head diameter) x 2.54 cm (body diameter).
• Weight 164 grams (including battery), 92 grams (without battery).
• Rigid body construction from aircraft hardened aluminum A6061-T6.
• Durable hard-to-scratch surface - Type III hard anodized.
• Impact-resistant from a fall from a height of 1 meter.
• Waterproof and dustproof according to the IP68 standard (tested under water at a depth of 2 meters for 30 minutes).
• Hardened ultra clear glass lens with anti-reflective coating.
• Tactical switch at the end of the light (instant on/off function by holding).
• Trapezoidal threads highly resistant to wear.
• The package includes a lamp, a Fenix ​​ARB-L21-5000U battery with a USB-C connector, a USB-C cable, a spare o-ring and a belt pouch.
• Optional accessories can be purchased: AER-05 cable switch, ALG-15 quick-clamp mounting on the weapon rail, ALG-00 quick-clamp mounting on the rail, ALG-18 barrel mounting.
• The following accessories are also compatible with the light: Fenix ​​ALD-05 helmet strap, AOD-S V2.0 diffuser, barrel mount, metal magnetic barrel mount, plastic magnetic barrel mount, light mount on optics, metal mount for rifle scope, ALP-10S case, bike mount, Fenix ​​bike mount.

The use

The rotary control at the end of the lamp can be used to choose between lighting modes that have different controls.

Tactical mode (rotary control in the left position): To turn on, press the tactical button at the end of the light, for immediate activation, hold the button. The lamp is always activated in the highest mode. To activate the strobe, hold down the button for 0.8 seconds (it also works in the off state). Holding down will return the lamp to its original mode. Press the button to turn off the lamp.

Service mode (rotary control in the right position): To turn on, press the tactical button at the end of the lamp, for immediate activation, hold the button. The lamp remembers the last selected mode (except stroboscope). Lighting modes (except stroboscope) can be changed cyclically by pressing the button. To activate the strobe, hold the button for 0.8 seconds (even from the off state). By squeezing, the lamp returns to its original mode. Press the button to turn off the lamp.

In the middle position of the rotary controller, it is possible to lock the control button. If the light is off, it cannot be turned on. If it is on, the control will be locked in the currently set lighting mode and the control button will not respond. To reactivate the tactical button, it is necessary to turn the controller to tactical or service mode.

When using the cable switch, only the highest constant light mode is available.

Intelligent protection against overheating - when the temperature of the lamp exceeds 60 °C, it will automatically reduce the output in successive steps until the temperature drops below the safe limit. After cooling below 60 °C, full power can be used again.

Warning of an exhausted battery - the lamp will gradually automatically switch to the lowest power and flash 3 times every five minutes.

Charging - remove the battery from the lamp and connect it to the side USB-C connector using a USB cable. During charging, the indicator light in the plus pole of the battery lights up red. When fully charged, it lights up blue or green. The charging current of the built-in USB-C connector is 2A. Charging time takes approximately 3-4 hours.

Warning

• Do not disassemble the sealed parts in the lamp head yourself, this will void the warranty.
• If the protective rubber rings appear damaged after a long period of use, replace them. The rings must also be lubricated to prevent rubber erosion. By following these rules, the lamp will be properly protected against water.
• If the light flickers, does not switch to higher power modes, or does not light up, it may be for one of the following reasons:
  
  • The battery is dead, charge it.
  • The contacts inside the lamp are clogged - clean them with a cotton swab dipped in alcohol.
  • The back part of the lamp is loose, tighten it.

Output: 3000lm
Max endurance: 43 hours
Aftersight: 274m
Number of modes: 7
Weight: 164g
Power supply: USB charging
Power supply: 1x 21700
Light source: Luminus SST-70
Waterproof: IP68 (immersion 2 m)