scheduleOur stores and their opening hours local_shippingDelivery and personal pick up are working normally
Localisation
Form is being processed

Fenix LR80R rechargeable LED light

449.90 

These goods are unavailable

heart_plusAdd it to your wishlist and we will inform You, when it will be available, or see other products in the category:
Front bike lights Front bike lights (Fenix)

You can try these searches

Services available for this product
local_shipping Free shipping
payment Pay in instalments  See how much you pay

The new ultra-powerful Fenix ​​LR80R rechargeable lamp brings an extreme luminous flux of up to 18,000 lumens (ANSI) and an afterglow of up to 1,130 meters. It achieves this performance thanks to six top Luminus SST-70 LEDs with a lifetime of 50,000 hours of light, which are powered by an internal high-current Li-ion battery with a capacity of 86.4 Wh. The battery is charged directly in the lamp via a modern USB-C connector with support for fast charging protocols. With the included 45W USB source, it charges in just four hours. The lamp offers control using two buttons, which can be used to separately control high and low lighting modes, including two hidden SOS flash modes and a strobe.

Due to the enormous light output, the lamp is equipped with a proximity sensor in the reflector, which automatically reduces the output to 50 lumens when the lamp approaches an object to less than about 6-8 centimeters (prevents damage to the object by strong light and glare by reflected light).

The lamp is equipped with five indicator LEDs that show the battery charge status. In addition, the lamp can also be used as a power bank in an emergency and charge other USB devices from it. The lamp has a removable handle in the basic package, to which you can attach a hanging eye and a tripod thread. The lamp can thus be carried in the hand or comfortably hung over the shoulder using a strap. It can also be mounted on a tripod and used as stationary lighting. This searchlight is particularly suitable for rescue and reconnaissance operations. It is also excellent for guarding large objects or for all lighting enthusiasts. It will please both professionals and the most demanding users.

All lamp parameters (luminous flux, battery operation time, waterproofing, afterglow and impact resistance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Fenix ​​LR80R lamp parameters

  • The light source is six modern Luminus SST-70 LEDs with a lifespan of 50,000 hours.
  • A total of 10 lighting modes in two groups:
    • High modes: 18000 lumens (2 hours) -> 12000 lumens (2.25 hours) -> 6000 lumens (2.8 hours) -> 3000 lumens (5.1 hours).
    • Low modes: 1000 lumens (15.7 hours) -> 450 lumens (39 hours) -> 150 lumens (92 hours) -> 50 lumens ( 300 hours ) -> Strobe (6000 lumens) -> SOS (150 lumens).
  • For power, it uses a high-current Li-ion battery built into the handle with a capacity of 86.4 Wh (12000 mAh / 7.2 V).
  • Charging a fully discharged battery takes approximately 4 hours with the included 45W USB-C source.
  • USB output for charging external USB devices, for example mobile phones, GPS navigation and other portable electronics.
  • The six-part smooth parabolic reflector creates a light cone with an extreme afterglow of up to 1130 meters (318000 cd).
  • The lamp has a memory and will always turn on in the last set mode within the group of modes (does not apply to flash modes).
  • Dimensions 25.9 cm (length) x 5.4 cm (body diameter) x 10.8 cm (reflector diameter).
  • Weight 1636 grams (including battery).
  • Status diodes at the control buttons for indicating the state of charge of the accumulator.
  • Made from aircraft hardened A6061-T6 aluminum.
  • Hard-to-scratch resistant surface - Type III hard anodized.
  • Impact-resistant from a fall from a height of 1 meter.
  • Waterproof and dustproof according to the IP68 standard (tested under water at a depth of 2 meters for 30 minutes).
  • Hardened ultra clear glass lens with anti-reflective coating.
  • Trapezoidal threads with increased wear resistance.
  • Able to stand on its own on a flat place and serve as a candle.
  • Solid metal handle for a comfortable grip (removable).
  • The handle can be equipped with a thread for screwing on a tripod or for attaching a strap.
  • The package includes an internal battery, a 45W USB-C power adapter, a USB-C charging cable, a shoulder strap adapter and a tripod thread, a shoulder strap and a spare o-ring.

The use

There may be an insulating cap on the battery from the factory. Remove it before first use.

Light control works in the form of two performance groups. The right button controls the high power modes and the left button controls the low power and hidden flash modes.

By holding down the left or right button for 0.5 seconds, the light switches on to the last set power mode within the selected mode group (left button = low modes, right button = high modes). Pressing the left button then cycles through the modes 50 - 150 - 450 - 1000 lumens, and pressing the right button switches between the modes 3000 - 6000 - 12000 and 18000 lumens.

By holding the right button for 1.2 seconds, you always activate the highest mode of 18000 lumens (even from the off state). By holding the left button for 1.2 seconds, the lamp will turn on the stroboscopic mode, then by pressing the button again, it will switch to SOS. The lamp is turned off by holding down any button for 0.5 seconds, the same as when it was turned on.

The control buttons can be locked to prevent spontaneous activation, e.g. when transported in luggage - in the off state, press both buttons and hold them for at least 3 seconds, then the light will flash, indicating locking. To unlock, it is necessary to hold both buttons again for three seconds. Unwanted switching on can also be prevented by unlocking the body of the lamp, which breaks the electrical contact between the head of the lamp and the battery.

Charging - unfold the rubber cover of the charging connector and plug the cable into the USB-C connector in the lamp, plug the other end into the USB-C connector on the included charging adapter. The indicator LEDs on the lamp flash from left to right during charging to show the charging status. After charging is complete, all five indicator LEDs will remain permanently lit. After charging is complete, seal the connector thoroughly with a rubber cap. During charging, the light can only be used in the lowest mode with an output of 50 lumens.

Charging external USB-C devices (powerbank function) - unfold the rubber cover of the USB connector and connect the device you want to charge with a suitable USB cable (only a USB-C device can be charged with the included cable). To activate the power bank function, you must briefly press one of the control buttons. After charging starts, the indicator LEDs will flash from right to left to show the battery status. After charging, do not forget to properly seal the USB-C connector with a rubber cap. While using the power bank function, the lamp can be used in all modes.

Battery charge status indication - after a short press of any button, the indicator LEDs light up for 3 seconds and show the battery charge status (the light must be switched off). Five lit LEDs means the battery is 80-100% charged, four lit 60-80%, three 40-60%, two 20-40% and one lit means the battery is less than 20% charged.

Intelligent protection against overheating - after exceeding the temperature of 60 °C, the lamp automatically gradually reduces the power in small steps to avoid overheating. After cooling, it can be switched back to the highest performance modes.

The proximity sensor in the reflector automatically reduces the output to 50 lumens when the lamp approaches an object to less than about 6-8 centimeters (prevents damage to the object by strong light and glare by reflected light).

Warning

  • Do not disassemble the sealed parts of the lamp yourself, this will void the warranty.
  • The battery has no memory effect, it can be charged at any time, even after each short use.
  • If the protective rubber rings appear damaged after a long period of use, replace them. The rings must also be lubricated to prevent rubber erosion. By following these rules, the lamp will be properly protected against water.
  • If the light flickers, does not switch to higher power modes, or does not light up, it may be for one of the following reasons:

    • The battery is dead, charge it.
    • The lamp body is loose, tighten it.

Warranty

Five-year warranty for the lamp, two-year warranty for the battery and charger.

Weight: 1636g

Number of modes: 10

Aftersight: 1130m

Output: 18000lm

Max endurance: 300 hours

Power supply: Internal accumulator

Light source: Luminus SST-70

Waterproof: IP68 (immersion 2 m)

Product details

Sport mountaineering
Colour black
product ID 137459

Rating 0/5

(0 ratings)
(0 ratings)
(0 ratings)
(0 ratings)
(0 ratings)
(0 ratings)
Add your rating
For every rating, you get points to the loyalty system

comment Reviews

There are currently no reviews

Form is being processed
Add rating
Form is being processed

comment Questions

There are currently no questions

Form is being processed
Fenix is a respected brand in the lighting industry, known for its high quality and reliable products. Founded in 2004, Fenix has built a reputation for producing a wide range of flashlights, headlamps, torches and other lighting solutions that are designed for a variety of outdoor, tactical and everyday use options. With its commitment to innovation, durability and reliability, Fenix has become a trusted name in the flashlight and lighting industry.

Shopping FAQ

All the answers to questions about delivery, payment, security, returns, warranty and much else.

You may find these products complementary

Why shop with us?

Find out what makes us special

Why shop with us?

More about shopping

900 000+ orders

We are the largest cycling e-shop in Slovakia proven by 100,000+ customers.

Unique customer service

We are available via email, online chat, phone or in person at our MTBIKER stores.

We actively support the cycling community in Slovakia

Thanks to your order we can support cycling development.

Secure payment methods

The payment process is safe and we offer you a wide range of options.

Loyalty system

We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.

MTBIKER centre and showroom

Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.

More about shopping
navigate_before navigate_next
keyboard_arrow_up